How to use Nanotol Display & Glasses Cleaner
- Spray the diluted cleaner on the wet, dirty surface.
- Spread the cleaner (preferably with your finger) and let it work for 10-15 seconds.
- Rinsing off: Wash off Nanotol Cleaner and the dirt with plenty of water. To do this, hold the glasses under the water pipe. Wipe electronic devices gently with a damp cloth.
- Dry off the surface. Use a lint-free cloth for this. The Nanotol microfiber cloth for displays & glasses is ideal for this.
How to use Nanotol Displays & Glasses Protector
- Spray Nanotol Protector on the cleaned surface.
- Spread the sealant evenly with your finger.
Don't worry, the Protector is harmless. - Let dry. A gray haze forms, but it is difficult to see on light and transparent surfaces.
- Polish the surface with a high quality microfiber cloth for glass until the surface has become noticeably smoother. Ideally, use the Nanotol microfiber cloth for displays & glasses included in the set.
TIP: If you feel the surface becoming smooth, you have sufficiently activated the Nanotol protective layer.
Required accessories:
Required accessories:
How to use Nanotol Displays & Glasses 1+2
- Wet the surface.
- Spray Nanotol 1 + 2 on the surface.
- Spread the liquid with your fingers and let the surfactants work for 10-15 seconds.
- Final rinse: Wash off Nanotol 1+2 and dirt with plenty of water. Hold your glasses under the water pipe. Wipe electronic devices gently with a damp cloth.
- Dry off the surface. Use a microfiber cloth for glass or the Nanotol microfiber cloth for displays & glasses included in the set.
TIP: Heat improves the result. The polishing with the microfiber cloth also generates heat.
If you are using Nanotol Displays & Glasses1+2 without first applying a basic seal with Nanotol Cleaner and Protector Set, repeat the process described above twice. The first time it is cleaned and the second time the sealant is applied.
How to use the Nanotol Displays & Glasses Set
CLEANING
- Spray the cleaner on the surface.
- Spread the cleaner (preferably with your finger) and let it work for 10-15 seconds.
- Rinsing off: Wash off Nanotol Cleaner and the dirt with plenty of water. To do this, hold the glasses under the water pipe. Wipe electronic devices gently with a damp cloth.
- Dry off the surface. Use a lint-free cloth for this. The Nanotol microfiber cloth for displays & glasses is ideal for this.
SEALING
- Spray Nanotol Protector on the cleaned surface.
- Spread the sealant evenly with your finger.
Don't worry, the Protector is harmless. - Let dry. A gray haze forms, but it is difficult to see on light and transparent surfaces.
- Polish the surface with a high quality microfiber cloth for glass until the surface has become noticeably smoother. Ideally, use the Nanotol microfiber cloth for displays & glasses included in the set.
TIP: If you feel the surface becoming smooth, you have sufficiently activated the Nanotol protective layer.
Viewed