Why is Nanotol better than other nano coatings?
- One-time use
- Universal application
- Sustainable effect
- Tested security
1. Single and easy application
Nanotol's basic coating is only carried out once. After that, the effect can easily be refreshed with Nanotol 1+2 if required, as long as the effect should last.
The basic nano coating consists of two steps
In order for the tiny nanopolymers to penetrate evenly into the pores of the surface, it is important that these are clean. Nanotol Car, Boat and Leisure Cleaner cleans gently and thoroughly with high-quality, non-ionic surfactants. The cleaner optimally prepares car paint, rims and car glass for the Nanotol Protector.
Nanotol Cleaner is easily biodegradable, chemically active and even removes dirt that is deep in the pores.
- Nano Coating
After cleaning, the tiny nanopolymers can "fill up" the pores. Nanotol Protector is spread very thinly on the surface and polished with a microfiber cloth after drying. The nanoparticles are activated and the surface is noticeably smoothed immediately. Water and dirt can no longer dock tightly.
This basic nano coating is only necessary once and can be refreshed again and again.
Refreshing and maintaining
- Nanotol 1+2
The coating can then be easily refreshed again and again, simply by cleaning with Nanotol 1+2.
Nanotol 1+2 cleans and coats simultaneously and quickly. Spray on, distribute, rinse off. Dry with a microfibre cloth.
2. Universal application
Nanotol is unique. Nanotol nano coating could be developed with the help of nanotechnology. Nanotol works with a network structure made of nanopolymers, which gently covers the surface like a protective shield. The network structure allows universal use on many different surfaces without "attacking" the surfaces, as is the case with chemical compounds. All surfaces coated with Nanotol can be cleaned with clear water. Cleaning agents are no longer needed. Dirt can no longer bond with the surface and the dirt-repellent property of a coated surface makes the use of surfactants superfluous.
3. Sustainable effect
Clean in half the time? Cleaning with almost no detergent? Clean without destroying the surface? What sounds like a nice wish becomes a reality with Nanotol. Due to the long-lasting and very resistant coating, treated surfaces can be easily cleaned with pure water.
The Nanotol nano coating creates a thin layer of nanopolymers. This layer is invisible - Dirt, dust or grease can no longer bond to the surface and can be easily removed from the coated surface with clear water (without the addition of cleaning agents). Nanotol nano coating is a further development of the well-known lotus effect and - thanks to the mechanical high-tech nano coating - does not attack the treated surfaces. If Nanotol Nano coating were used across the board, the environment could be saved millions of tons of surfactants every year. It can hardly be more sustainable. A benefit not only for the environment, but also for people suffering from allergies. > Nanotol and the environment