Glasses
Longer clean lenses, easier cleaning, protection against grease dirt and scratches.
Smartphone
Easier cleaning of fingerprints, hygienic clean surface and high quality appearance.
Touch Displays
Hygienically clean touch displays easily and quickly without disinfectants.
Advertising screens
Antistatic, longer clean, water and dirt repellent surfaces and higher transmittance.
Nanotol
Nano coating
for displays and glasses
Ideal for
> spectacle lenses and frames
Nanotol
Nano coating
for displays and glasses
Ideal for
> camera lenses and helmet visors
Nanotol
Nano coating
for displays and glasses
Ideal for
> television and monitor
Nanotol
Nano coating
for displays and glasses
Ideal for
> smartphones, tablets and laptops
The set forms the ideal basis for a long-lasting effect on all glasses, sunglasses, smartphone tablet, TV, monitor and also camera lenses.
Refresh if necessary with 2in1. Thus the effect lasts a lifetime.
Nano coating for Displys & Eyeglasses
Smartphones and glasses are blasting bacteria
Regular cleaning is strongly recommended. While we are on the phone, bacteria from the lungs or germs can get onto the device. But our hands can also transmit pathogens. Regular maintenance is therefore extremely important.
✔ Dirt-repellent surface
- so that the glasses stay clean longer
✔ Easy-to-clean effect
- for quick cleaning in between without streaks
✔ invisible protective layer
- Protection against scratches and aging
Displays & Glasses Set for basic coating
The set forms the ideal basis for long-term protection on glasses, smartphones and monitors.
Displays & Glasses Cleaner + Refresher
Eyeglasses spray with lotus effect, refreshes the coating again and again, simply by cleaning.
Nano coating for glasses & touch displays
1-2-3 fat fingers free
Glasses and cell phones touch our faces directly. As a result, dirt and germs constantly come to our skin with our hands. Nanotol nano coating forms an invisible protective layer on the surface, hence, dirt can be removed quickly and easily with a dry cloth.
Nanotol Nano Coating for Displays and Glasses
Nanotol Displays & Glasses Cleaner and Protector are a high-tech nano coating system for electronic devices, displays and eyewear. Our nano coating has a life long effect with 2in1, going far beyond the well-known lotus effect. It provides effective protection against grease and dirt and reduces micro-scratches on the surface. The nano coating is ideal for eyewear, camera lenses, helmet visors, televisions, monitors, smartphones and tablets, glass, electronic devices, laptops / PCs or keyboards. Nanotol is a multiple winner, has a hygienic effect, is skin-friendly, food-safe and environmentally friendly. >> how Nanotol works
STEP "1": CLEANING
Tiny nanopolymers can only enter the pores of the surface when they are really clean. Nanotol Display & Glasses Cleaner ideally prepares any surface for sealing with Nanotol Protector.
STEP "2": SEALING
After cleaning the surface, tiny nanopolymers „fill“ the pores. Nanotol Protector should be applied thinly and as soon as the surface has dried, it needs to be polished with a microfiber cloth. This activates nano particles and smoothens the surface. Water and dirt can no longer firmly bond to the surface.
STEP "1 + 2" RENEWING
Prolong the effect by replenishing the sealant with Nanotol 2in1 as often as you want.
Nanotol 2in1 quickly cleans and seals surfaces in one step.
SET for basic sealing
STEP 1 (Cleaner) + STEP 2 (Protector)
1 x Nanotol Microfiber Cloth for glasses and displays
Nanotol - Lotuseffekt für Brillen und Displays
Nanotol Displays & Brillen Protector ist eine Hightech Beschichtung für Brillengläser und Touchdisplays. Ab jetzt müssen Sie den Lotuseffekt beim Optiker nicht mehr teuer bezahlen, sondern können ihn auf allen Ihren Brillen, Smartphone, Tablet und sogar TV selbt erzeugen. Die spezielle Nanotol Beschichtung verändert die mikro- und auch nanoskopische Beschaffenehit der Oberfläche und vermindert so die Haftung von Schmutzpartikeln und Wasser. So wird Brillenputzen auf ein Minimum an Zeit reduziert und die Brillengläser bleiben länger sauber. Die Beschichtung schützt zudem vor Kratzern, die durch Reinigung entstehen. Die antistatische Nanotol Beschichtung ist mehrfacher Testsieger, wirkt hygienisch, ist hautfreundlich, lebensmittelecht und umweltfreundlich. >> So funktioniert Nanotol
HighTech Nano-coating
for Display & Glasses
for Display & Glasses
Nanotol Displays & Brillen Protector is a high-tech coating for glasses and touch displays.
If you are also annoyed that your glasses or your smartphone are often smeared and dirty, then we have the solution for you. Mostly the problem is cleaning with detergent or alcohol-containing cleaning cloths. These ensure that the surface is clean after cleaning, but attracts dust and dirt like a magnet.
The Nanotol products, on the other hand, produce an antistatic effect by changing the micro- and also nanoscopic properties of the surface and thus reducing the adhesion of dirt particles and water. This way, cleaning glasses is reduced to a minimum of time and the glasses stay clean longer.
The coating also protects against scratches caused by cleaning. The antistatic Nanotol coating is a multiple test winner, has a hygienic effect, is skin-friendly, food-safe and environmentally friendly.
Nanotol Displays & Brillen Protector is a high-tech coating for glasses and touch displays.
If you are also annoyed that your glasses or your smartphone are often smeared and dirty, then we have the solution for you. Mostly the problem is cleaning with detergent or alcohol-containing cleaning cloths. These ensure that the surface is clean after cleaning, but attracts dust and dirt like a magnet.
The Nanotol products, on the other hand, produce an antistatic effect by changing the micro- and also nanoscopic properties of the surface and thus reducing the adhesion of dirt particles and water. This way, cleaning glasses is reduced to a minimum of time and the glasses stay clean longer.
The coating also protects against scratches caused by cleaning. The antistatic Nanotol coating is a multiple test winner, has a hygienic effect, is skin-friendly, food-safe and environmentally friendly.
Nanotol - lotus effect and hygiene
for glasses and displays
Nanotol Displays & Glasses Protector is a high-tech coating for glasses and touch displays. If you are also annoyed that your glasses or smartphone are often smeared and dirty, then we have the solution for you here.
Usually the problem is cleaning with detergent or cleaning cloths containing alcohol. These ensure that the surface is clean after cleaning, but attracts dust and dirt like a magnet. The Nanotol products, on the other hand, generate an antistatic effect by changing the microscopic and nanoscopic properties of the surface and thus reducing the adhesion of dirt particles and water.
Cleaning glasses is reduced to a minimum and the glasses stay clean longer. The coating also protects against scratches caused by cleaning. The antistatic Nanotol coating has won multiple tests, is hygienic, skin-friendly, food-safe and environmentally friendly.
Olaf M. - 16.6.2020 
Nanotol Display & Glasses
"My reading glasses and my monitor have become super clean and I only need to wipe the glasses briefly with a cloth and have a clear view."
Peter N. - 01.11.2020 Nanotol Display & Glasses
"Very satisfied. Use it on glasses, smartphone, iPad and smartwatch."
Nanotol is easy to use
Cleaning and coating only once! - Refresh if necessary
Basic nano coating
The unique basic coating forms the basis for the protective layer that will last for years. The set contains everything needed for the basic coating:
- Pre-cleaner
- Nano coating
- Polishing cloth
STEP "1": CLEANING (once)
Before sealing, it is very important that the surface is clean and free of grease. Nanotol Display & Glasses Cleaner cleans with high-quality, non-ionic surfactants gently, pore-deep and hygienically clean.
The cleaner optimally prepares every surface for the Nanotol Protector.
Nanotol Cleaner is readily biodegradable, chemically active, and kind to skin
STEP "2": SEALING (once)
Tiny small nanopolymers occupy the pores after sealing and fill them up. Nanotol Protector is spread very thinly on the surface and, after drying, polished with a microfiber cloth. The nanoparticles are activated and the surface is immediately noticeably smoothed. Water and dirt can not stick anymore.
The sealing is only needed once, lasts for many weeks and can be replenished with Nanotol 2in1.
Refreshment + Care
After a few weeks or months (depending on use), we recommend refreshing. Nanotol 2in1 cleans and coats in one step and refills imperfections. Already coated surfaces remain active and dirt-repellent for longer - as long as you want.
Nanotol 2in1 is simply sprayed onto the surface, distributed and then polished with the microfiber cloth. That's all!
Easy cleaning
Protection against scratches
Hygienically clean touch displays
Less fingerprints
Higher contrast
Nicer colors
Universally applicable
Lotuseffect
so that the glasses stay clean longer
Hygienically clean touch displays
Less fingerprints
Better Contrast
Nicer colours
Universally applicable
The Nanotol effect on glasses and smartphones
- Glasses and displays are dust, dirt and grease repellent
- The surface is antistatic (dust repellent)
- Glasses stay clean much longer and are far easier to clean
- Smartphones have a scratch resistant protective layer
- Monitor, television, laptop, tablet incl. housing etc. are dirt repellent and easier to clean
- Monitors have a higher contrast
- Coated objects stay new and beautiful much longer
Why should you protect your glasses or your smartphone with Nanotol Protector?
Because it protects the sensitive surface with our nano technology, glasses stay clean much longer and are faster to clean, the touchscreen of your smartphone becomes hygienically clean and has less fingerprints on it.
Glasses or smartphones are quickly smeared and greasy without the coating with Nanotol Protector. ATP measurements proved a high germination on touchscreens which are not cleaned regularly. This is unhygienic and dangerous.
Nanotol Cleaner and Protector not only cleans hygienically but it also forms an invisible protective layer on the surface. The surface is so smooth, that bacteria can hardly settle on the surface and can easily be removed again.
Is the coating dangerous for you or your glasses/smartphone?
No, it isn't!
Nanotol is completely harmless for human and animal:
Nanotol Protector coating has been tested many times and developed specifically for the enduser. A network of nanopolymers is lying on the surface. Several laboratories proved that no single nano particles can be found in the nano coating which could harm any human. Nanotol exists for more than 10 years. Nanotol has been thoroughly tested and Nanotol continues development for the benefit of users.
Nanotol Cleaner and Protector are hygienic and protective on every surface. The smoothness of the surface provides a dirt repellent effect which makes glasses and displays stay clean much longer and protects against scratches. The layer is invisible but surfaces look new and superior due to the smoothness.
Surfaces coated with Nanotol Protector can be treated with Nanotol Displays & Glasses 2in1. This prolongs the effect of the coating. As soon as the coating effect disappears, you can easily renew it.
Why is Nanotol better than other nano coatings?
1. Nanotol Displays & Glasses is universally applicable on all glasses, mobiles and monitors. You don’t need different cleaners or protective films anymore.
2. Nanotol products are safe to use. Different tests have certified that Nanotol Cleaner and Protector are even qualified in direct contact with foodstuffs. It was proved that no single nano particles were found on a surface coated with Nanotol. All products are produced according to the highest safety precautions and perfectly suitable to be used in private households.
3. Nanotol Displays & Glasses Cleaner and Protector are completely biodegradable according to OECD regulations 301/302. Surfaces coated with Nanotol stay clean much longer and are easier to clean.
4. Nanotol Displays & Glasses Cleaner and Protector are very easy to use. The products do not contain any alcohol or solvents. They don’t smell and can be used anywhere.
What do you need to start coating?
If you want to start coating glasses or a smartphone for the first time, we recommend to use our Nanotol sets which are available in different sizes. Nanotol sets include Nanotol Cleaner ready to use and Nanotol Protector and additionally a Nanotol microfiber cloth especially for sensitive surfaces. The “all-inclusive” set for all applications.
You can choose between two sets depending on the quantity or size of the object which you like to protect:
Nanotol Displays & GlassesSet S is sufficient for approx. 8 m² and suitable for one person with more than one pair of glasses, computer or laptop, smartphone and navi etc.
Nanotol Displays & Glasses Set M enough for approx. 20 m², a family size or for persons with several electronic devices. Treat your computer housing, printer, telephone or navi with a coating. They will be dust repellent and remain new.
Of course you can also buy all products individually:
Nanotol Displays & Glasses Cleaner is a very deep cleaner against dirt on electronic devices or on all kind of glasses. This cleaner even removes dirt particles on clean looking surfaces and provides hygienic cleanliness.
Nanotol Displays & Glasses Cleaner is ideally suited to prepare all surfaces of glasses, electronic devices and even sensitive glasses and displays prior to coating with Nanotol Protector. Cleaning deeply without alcohol is an important preparation so that nano polymers in the Nanotol Protector can uniformly attach to the surface.
Nanotol Displays & Glasses Protector is the nano coating for all glasses and monitors or smartphones. Even anti-glare glasses or sensitive camera lenses are antistatic and dirt repellent.
Nanotol microfiber cloth for Displays & Glasses is a high quality and durable cloth which is great for perfect cleaning and coating.
How long does the coating work?
The duration of the Nanotol protection on surfaces depends on the demands made of it. Experience shows that it lasts several months on glasses and several weeks on mobiles. The protective layer can be prolonged with Nanotol displays & glasses 2in1.
for Displays and Eyeglasses
1 - Cleaning
zum Produkt
Nanotol Displays & Glasses Cleaner
Tiny nano polymers can only enter the pores of the surface when they are really clean. Nanotol Display & Glasses Cleaner cleans with high quality, nonionic surfactants gently but thoroughly. The Cleaner ideally prepares any surface for coating with Nanotol Protector.
Nanotol Cleaner is easily biodegradable, chemically active and even removes the most stubborn dirt. ATP measurements have shown no bacterial contamination after cleaning with Nanotol.
2 - Coating
zum Produkt
Nanotol Displays & Glasses Protecor
After cleaning the surface, tiny nanopolymers „fill“ the pores. Nanotol Protector should be applied thinly and as soon as the surface has dried, it needs to be polished with a microfiber cloth. This activates nano particles and smoothens the surface. Water and dirt can no longer firmly bond to the surface.
This basic nano coating is necessary only once and can be renewed with Nanotol 2in1.
1+2 - Renewing
zum Produkt
Nanotol Displays & Glasses 2in1
Prolong the effect by replenishing the nano coating with Nanotol 2in1. Its quick cleaning and coating in one step. Just spray, apply all over and wipe with a microfiber cloth.
Nanotol 2in1 is also great to be used directly on a phone or monitor and is used regularly then.