Nano coating for touch-displays
Nanotol Displays & glasses forms an invisible protective layer
on surfaces that are touched frequently
By smoothing the surface, they stay clean longer and can be cleaned in a flash with a dry microfiber cloth.
Apply nano coating for touch displays yourself
Surfaces on terminals, ticket machines or public monitors are touched by many hands and are therefore often unhygienic. In addition, they quickly look unappetising due to fingerprints and other dirt. Nanotol nano coating enables quick cleaning in between, simply by wiping with a dry cloth.
Simple, inexpensive, effective!
Basic coating of touch displays with the Nanotol Display & Glasses Set
Care and refreshment with Nanotol Display & Glasses 2in1
- Indoor and outdoor public monitors
- Electronic exhibition equipment
- Display boards, advertising boards, information boards
- Digital outdoor advertising, customer stoppers
- Outdoor LED advertising boards
You can coat all display surfaces, no matter if the display is made of glass or plastic, no matter whether it is indoors or outdoors.
Easy to apply
- Coating is quick and easy
- One-time basic nano coating
- Detailed instructions enclosed
- Inexpensive care products for refreshing
The basic nano coating with the Nanotol Display & Glasses Set is done quickly and easily. You clean the surface with Nanotol Cleaner, apply the nano coating with Nanotol Protector and polish it after drying with the Nanotol microfibre cloth.
50% less cleaning
Surfaces stay clean longer than before.
Nanotol fills the pores of the surface and makes them noticeably smoother. Dirt sticks less to the surface.
80% faster cleaning
Grease and dirt no longer bonds with the surface and can be removed just with a microfiber cloth, very quickly and easily.
crystal glass effect
By smoothing the surface, displays look high-quality and new. Glass looks clean and superior like crystal glass.
Nanotol increases the degree of transmission. Glass surfaces thus let more light through - the images appear sharper and have more contrast. In addition, the touch sensitivity is slightly increased, which leads to easier use.
Nano coating set for screens and touch-displays.
After the basic nano coating with Nanotol Cleaner (1 - precleaner) and Nanotol Protector (2- nano coating), you only need the Nanotol microfibre cloth for cleaning. We recommend additional microfibre cloths (40 x 40 cm) because that's all you need for cleaning in future.
Refreshing every 1-2 weeks
After the basic nano coating, only refresh with Nanotol 1+2 if required.
Basic nano coating set for 20 qm
125 ml each Cleaner (1) and Protector (2)
Nanotol microfibre cloth set of 5
For dry cleaning after nano coating with Nanotol
250 ml + 5 Liter refill canister
This is how easy it is to nano coat your glasses or displays with Nanotol
Basic nano coating for all kinds of screens and displays:
Clean the display with Nanotol Cleaner (1).
To do this, carefully spray the cleaner onto the display and optionally also onto the back. Spread the cleaner and wipe off dirt and cleaner residues with the microfibre cloth.
Applying the Nanotol Protector nano coating(2)
Apply the Protector evenly onto the display, spread the liquid and let it dry. A slight grey haze will appear.
Activate the nanopolymers with the Nanotol microfibre cloth.
After drying, polish the display with the microfibre cloth until the grey haze is gone. This activates the nanopolymers and you will feel the smoothness of the surface.
All necessary components are included in the Nanotol Display & Glasses Set
Basic nano coating
The unique basic coating forms the basis for the protective layer that will last for years. The set contains everything needed for the basic coating:
- Nano coating
- Polishing cloth
Refreshment + Care
After a few weeks or months (depending on use), we recommend refreshing. Nanotol 2in1 cleans and coats in one step and refills imperfections. Already coated surfaces remain active and dirt-repellent for longer - as long as you want.
Nanotol 2in1 is simply sprayed onto the surface, distributed and then polished with the microfiber cloth. That's all!
Die einmalige Grundversiegelung bildet die Basis für die jahrelange Schutzschicht.. Das Set enthält alles, was für die Grundversiegelung benötigt wird
Alle 6-9 Monate empfehlen wir eine Auffrischung. Nanotol 2in1 reinigt und versiegelt in einem Schritt und füllt Fehlstellen wieder auf. Bereits versiegelte Oberflächen bleiben länger aktiv und Schmutz abweisend - solange Sie möchten.
Nanotol 2in1 wird einfach auf das nasse Auto aufgesprüht, mit einem Tuch verteilt und dann mit dem gelösten Schmutz wieder abgespült. Das ist alles!
Further advantages of Nanotol displays & glasses nano coating
Glass coated with Nanotol achieves a higher transmittance. This means that more light rays can pass through the glass unhindered and without deviation.
- Sharper images - more contrast
- Photovoltaic modules have a higher efficiency
- Clearer colors on displays
Hygienically clean surfaces
A surface coated with Nanotol becomes hygienically clean when cleaned with the Nanotol microfiber cloth. The surface of the glass, whether eyeglasses or smartphone, is so smooth that dirt can be removed very easily and completely without cleaning agents.
General questions about Nanotol
Here are questions that do not concern a specific application with Nanotol:
What is the coverage of the display coating?
You can cover a display surface of 160 m² with 1 litre of Nanotol Display Protector.
You can maintain and freshen up 160 m² with 1 litre of Nanotol Display 1+2.
Why is Nanotol much cheaper than other display coatings?
Nanotol is exclusively distributed directly by the manufacturer CeNano GmbH & Co. KG. If you buy through this website, you purchase the product without intermediaries, who usually multiply the calculation.
8 m² of display surface can be coated with 50 ml Nanotol Display Protector. The basic coating set costs only a fraction of other products per coated display.
How often do you have to clean exhibition equipment or public screens after they have been coated with Nanotol?
Normally, surfaces that are touched a lot have to be cleaned daily with cleaning agents for hygienic reasons. This is a time-consuming process, which is also harmful to sensitive displays, because alcohol-based cleaners are usually used to prevent streaking.
After coating with Nanotol, it is sufficient to remove dirt quickly and efficiently once a day with a dry cloth. Refreshing with Nanotol 1+2 is necessary every 1-4 weeks and after 3 months for surfaces not used frequently.