Nano coating for glasses
Nanotol Displays & Glasses forms an invisible protective layer
on sensitive spectacle lenses
Lenses stay clean longer, are easier to clean and protected from scratches.
DIY - Apply nano coating for glasses yourself
Nanotol nano coating replaces the expensive lotus effect coating by the optician. Finally, spectacle lenses can be refined in such a way that they repel dirt and dust. Cleaning is therefore very easy and gentle. The invisible protective layer also counteracts scratches caused by conventional cleaning.
Basic coating of the glasses with the Nanotol Display & Glasses Set
Care and refreshment with Nanotol Display & Glasses 2in1
- varifocals, reading glasses, VDU glasses
- Anti-reflective lenses
- Sunglasses, safety glasses
- Ski goggles, helmet visors
One product for all glasses.
You can nano coat all transparent surfaces and get clearer, higher contrast images!
Easy to apply
- Coating is quick and easy
- One-time basic nano coating
- Detailed instructions enclosed
- Inexpensive care products for refreshing
The basic nano coating with the Nanotol Display & Glasses Set is done quickly and easily. You clean the surface with Nanotol Cleaner, apply the nano coating with Nanotol Protector and polish it after drying with the Nanotol microfibre cloth.
50% less cleaning
Clean lenses for longer.
Nanotol fills the pores of the lens and makes them noticeably smoother. Dirt therefore adheres less.
Conventional eyeglass cleaners often electrically charge lenses and therefore act like a magnet on dust particles. Nanotol prevents this charge. The lenses therefore repel dust.
Protection from scratches
Lenses keep looking new for longer.
The invisible protective layer of Nanotol prevents dust and dirt particles from leaving scratches on the sensitive glass surface during cleaning.
Simply wipe dry.
After Nanotol coating, you only need a Nanotol microfibre cloth for cleaning. Any dirt can be removed easily, quickly and gently with it.
Nano coating set for glasses and smartphone.
After the basic nano coating with Nanotol Cleaner and Nanotol Protector, you only need the Nanotol microfibre cloth for cleaning. The basic coating set also includes the refresher and a Nanotol microfibre cloth. However, we recommend additional microfibre cloths so that you always have one at hand. Because that's all you need for cleaning.
Refreshing every 4-12 weeks
After the basic nano coating, only refresh with Nanotol 1+2 if required.
Basic nano coating set + Refresher
50 ml each Cleaner (1), Protector (2), Refresher (1+2)
Nanotol microfibre cloth set of 5
For dry cleaning after nano coating with Nanotol
This is how easy it is to nano coat your glasses or displays with Nanotol
Basic coating for glasses:
Clean the glasses with Nanotol Cleaner (1).
To do this, spray the cleaner onto the lenses and optionally also onto the frame. Spread the cleaner with your fingers and rinse off dirt and cleaner residues under the water pipe. Finally, dry the lenses with the enclosed microfibre cloth.
Applying the Nanotol Protector nano coating (2)
Apply the Protector evenly to the lenses and put the glasses aside until the Protector has dried. A grey haze is formed.
Activate the nanopolymers with the Nanotol microfibre cloth.
After drying, polish the lenses with the microfibre cloth until the grey haze is gone. This activates the nanopolymers and you will feel the smoothing of the surface.
All necessary components are included in the Nanotol Display & Glasses Set
Basic nano coating
The unique basic coating forms the basis for the protective layer that will last for years. The set contains everything needed for the basic coating:
- Nano coating
- Polishing cloth
Refreshment + Care
After a few weeks or months (depending on use), we recommend refreshing. Nanotol 2in1 cleans and coats in one step and refills imperfections. Already coated surfaces remain active and dirt-repellent for longer - as long as you want.
Nanotol 2in1 is simply sprayed onto the surface, distributed and then polished with the microfiber cloth. That's all!
Die einmalige Grundversiegelung bildet die Basis für die jahrelange Schutzschicht.. Das Set enthält alles, was für die Grundversiegelung benötigt wird
Alle 6-9 Monate empfehlen wir eine Auffrischung. Nanotol 2in1 reinigt und versiegelt in einem Schritt und füllt Fehlstellen wieder auf. Bereits versiegelte Oberflächen bleiben länger aktiv und Schmutz abweisend - solange Sie möchten.
Nanotol 2in1 wird einfach auf das nasse Auto aufgesprüht, mit einem Tuch verteilt und dann mit dem gelösten Schmutz wieder abgespült. Das ist alles!
Hygienically clean surfaces thanks to Nanotol
After coating with Nanotol
simply rinse dirt from your glasses.
Further advantages of Nanotol displays & glasses nano coating
Glass coated with Nanotol achieves a higher transmittance. This means that more light rays can pass through the glass unhindered and without deviation.
- Sharper images - more contrast
- Photovoltaic modules have a higher efficiency
- Clearer colors on displays
Hygienically clean surfaces
A surface coated with Nanotol becomes hygienically clean when cleaned with the Nanotol microfiber cloth. The surface of the glass, whether eyeglasses or smartphone, is so smooth that dirt can be removed very easily and completely without cleaning agents.
General questions about Nanotol
Here are questions that do not concern a specific application with Nanotol:
Why do glasses stay clean longer with Nanotol?
- The surface of the eyeglasses is noticeably smoothed by Nanotol and therefore repels dirt. Less dirt settles on it.
- The glass surface is polarised by Nanotol and thus dust-repellent.
Can I continue to clean the glasses with washing-up liquid?
Many glasses wearers clean their glasses once a day with washing-up liquid under the tap. However you should be aware of the following:
- Washing-up liquids contain anionic surfactants. These have negatively charged free particles and thus attract dust. This is the reason why cleaning with washing-up liquids has to be repeated daily.
- Washing-up liquids make the glass surface noticeably dull. Dirt and dust can therefore adhere particularly well.
After coating with Nanotol, the glass is antistatic and repels dirt and dust. If you want, you can continue to rinse the glasses daily under water. You should no longer use washing-up liquid, because it neutralises the antistatic coating. Daily cleaning is no longer necessary anyway. For hygienic cleaning, it is sufficient to remove grease and dirt with the dry Nanotol microfibre cloth.
How often do you have to clean the glasses after coating them with Nanotol?
This varies and of course depends on the situation. But basically it is sufficient to clean glasses once a day with the dry microfibre cloth and rinse under the tap every few days to remove dirt and grease from the corners as well.
Can I still use cleaning sprays for glasses after coating with Nanotol?
No, because these contain alcohol or other solvents and will harm the antistatic protective layer on the glasses.
Can I also protect the frame with the Nanotol nano coating?
Yes, even the frame of the glasses, no matter what material, becomes dirt-repellent and can be cleaned hygienically quickly and easily under the tap, after the nano coating with Nanotol.
What is the difference between normal cleaning sprays for glasses and nano coating with Nanotol?
The difference lies in the static charge of the outer surface.
The surface is negatively charged by "normal" alcohol-based cleaners for eyeglasses or by conventional cleaning agents. This results in a dirt and dust attracting effect.
Nanotol, however, does not charge the surface but creates an antistatic layer. This repels dust and the glasses stay clean longer and are easier to clean.