Nanotol Car, Boat + Leisure 2in1 Cleaner + Protector
50 ml - Tiefenreiniger und Schnellversiegelung für Auto, Wohnwagen, Boot. Reinigt porentief und versiegelt die Oberfläche gleichzeitig gegen Neuverschmutzung. Durch weniger und schonendere Reinigung bleiben Oberflächen länger neuwertig.
Prices incl. VAT plus shipping costs
- Vehicle cleaner with nano sealing (paint, glass, rims)
- Water, dirt and oil repellent
- Invisible protective layer
- Easy-to-clean effect
- Shine enhancer
- Longer value retention for car paint
- Range: 160 qm / liter
- Freshener for Nanotol Protector
- Rain deflector on windshield (beading effect)
.
Ready to ship today
Delivery time 2 days in Germany. Shipping time other countries
Hybrid Technology: Cleaning + Nano Coating in one product. Repels rain and protects windshields. Renews the nano coating.
Combination of Nanotol Car, Boat & Leisure Cleaner (Step 1) and Protector (Step 2 - coating).
Product information Nanotol Car, Boat & Leisure 2in1
| Type of product | Cleaning agent with nano polymeres for a lotus effect |
| Mixing ratio | Ready to use |
| Range | 160 m² per Liter |
| Sizes | 50 ml for approx. 8 m² |
| 250 ml for approx. 40 m² | |
| 500 ml for approx. 80 m² | |
| 1000 ml for approx. 160 m² | |
| 5000 ml for approx. 800 m² | |
| Accessories | Microfiber cloth for drying and polishing |
Product videos
Effect on a windscreen |
 |
Possible areas of application
- on all surfaces coated with Nanotol Protector to maintain the anti-stick coating.
- on all vehicle surfaces which have not been coated yet (anti-stick effect slightly weaker than on surfaces which have been treated with Nanotol Protector).
Nano coating for windshield / car glass / mirror
Cleans and coats glass surfaces against new soiling. Due to the smoothness of the glass surface, dirt slides off the windshield easily with rainwater. Water rolls off and allows driving without the use of a windscreen wiper from approx. 80 kmh. Other products usually form a layer on the glass, which produces streaks by the windscreen wipers. Nanopolymers of Nanotol are located in the micropores of the glass which is why no streaks are visible when it rains. Another advantage of the increased sliding properties is a significantly longer service life of the wipers.
Nano coating for car paint / GRP on caravan or boat / Chrome / Rims
The smoother a surface, the better it shines. Nanotol 2in1 fills the micropores of the surface and makes it smooth. This enables an even radiation of UV rays. Vehicle paints therefore shine more after a treatment with Nanotol sealant than before. Due to the smoothness there is less dirt left which can be removed more easily. All you need is water and a cloth. You no longer need any harsh cleaning agents that attack and roughen the surface. Even brake dust can be removed easily with water. This protects the paint or the plastic, it remains beautiful much longer.
The Nanotol Effect
- Paint, plastic, rims, metal and glass becomes dirt and water repellent, (lotus effect)
- The vehicle stays clean much longer (no need to use car wash facilities)
- Mud and dirt on bicycles or motorcycles, for example, can easily be removed with water
- Lotus effect on windscreens and motorcycle visors (driving without wipers as of approx. 80 km/h)
- Rain removes dirt
- Shiny paint and plastic due to smoothness of surface
- Protection against environmental influences (invisible protective layer)
- Brake dust can easily be removed on rims
- Ageing of paint, alloys and plastic (i.e. boats) is much slower (longer value of surface)
- Maintaining surfaces which have already been coated with Nanotol Car, Boat & Leisure Protector
1. Cleaning
Product Information
Nanotol Car, Boat & Leisure Cleaner
Tiny nanopolymers can only enter the pores of the surface when they are really clean. Nanotol Car, Boat and Leisure Cleaner cleans with high quality, nonionic surfactants gently but thoroughly.
The Cleaner ideally prepares car paint, rims and glass for coating with Nanotol protector.
Nanotol Cleaner is easily biodegradable, chemically active and even removes stubborn dirt.
2. Coating
Product Information
Nanotol Car, Boat & Leisure Protector
After cleaning the surface, tiny nanopolymers „fill“ the pores. Nanotol Protector should be applied thinly and as soon as the surface has dried, it needs to be polished with a microfiber cloth. This activates nano particles and smoothens the surface. Water and dirt can no longer firmly bond to the surface.
This basic coating is only required once and can be renewed from time to time.
1 + 2 Renewing
Product Information
Nanotol Car, Boat & Leisure 2in1
The Nanotol effect can be replenished with Nanotol 2in1 occasionally.
Nanotol 2in1 quickly cleans and coats surfaces in one step. Just spray, apply all over, rinse off and dry with a microfiber cloth.
Regular application of Nanotol 1 + 2 will permanently preserve the effect of the Nanotol coating.
Sets for basic coating with Nanotol Cleaner und Nanotol Protector
Nanotol Car, Boat & Leisure Set
S“ - 36,90 €
buy now
Cleaning and Coating for approx. 20m²
(sufficient for one vehicle size BMW, Audi or Mercedes)
Set-Content:- 50 ml (Step 1) Nanotol Car, Boat & Leisure Cleaner Concentrate
- 125 ml (Step 2) Nanotol Car, Boat & Leisure Protector for 20 m²
- 1000ml spray bottle with Cleaner (Step 1 - ready to use) and for multiple refill
- 2 sponge cloths
- 2 Nanotol high tech microfiber cloths
- 1 Nanotol fluffy dryer cloth - 600 g/m²
- User manual
Nanotol Car, Boat & Leisure Set
„M“ - 49,90 €
buy now
Cleaning and Coating for approx. 40m²
(sufficient for two vehicles or vans, transporter and small mobile homes)
Set-Content:- 125 ml (Step 1) Nanotol Car, Boat & Leisure Cleaner Concentrate
- 250 ml (Step 2) Nanotol Car, Boat & Leisure Protector for 40 m²
- 1000ml spray bottle with Cleaner (Step 1 - ready to use) and for multiple refill
- 2 sponge cloths
- 2 Nanotol high tech microfiber cloths
- 1 Nanotol fluffy dryer cloth - 600 g/m²
- User manual
Nanotol Car, Boat & Leisure Set
„XL“ - 129,90 €
buy now
Cleaning and Coating for approx. 160m²
(sufficient for eight vehicles, mobile homes or boat)
Set-Content:- 500 ml (Step 1) Nanotol Car, Boat & Leisure Cleaner Concentrate
- 1000 ml (Step 2) Nanotol Car, Boat & Leisure Protector for 160 m²
- 1000ml spray bottle with Cleaner (Step 1 - ready to use) and for multiple refill
- 2 sponge cloths
- 2 Nanotol high tech microfiber cloths
- 1 Nanotol fluffy dryer cloth - 600 g/m²
- User manual
Great for
- alu rims
- bmx
- boat
- bicycle
- car glass
- car paint
- caravan
- dinghy
- garage door
- gfk
- yachts
- leather
- luminous advertising
- mobile home
- motorcycles
- mountain bike
- photovoltaic
- plastic
- plexiglass
- rims
- rubber
- sailing boat
- solar system
- trekking bike
- visor
'0'
Nanotol – We take environment friendliness seriously
Nanotol 2in1 Cleaner and Protector is very eco-friendly, not only due to minimal product use but especially due to its complete biodegradability. This is proved by numerous tests and certificates.
- Eco-friendly – coating with Nanotol makes the use of surfactants superfluous
- Microplastic-free, fragrance-free and vegan
- Certified and qualified for direct contact with foodstuffs
- Completely biodegradable according to OECD guidelines 301/302
- Based on nonionic surfactants
- Verification of the hygienic effect by SGS Institute Fresenius.
- Without solvents
- Skin-neutral
- Gentle, thorough cleaning without scrubbing
- Universal use
 |
 |
How to use Nanotol Car, Boat & Leisure 1+2
- Wet the vehicle.
- Spray Nanotol 1 + 2 on the surface - approx. 4 sprays per square meter.
- Spread the liquid and let the tensides work for 30-60 seconds. Use the blue sponge cloth included in the set or another soft cloth.
- Rinse: wash off Nanotol 1 + 2 and the dirt with plenty of water.
- Dry off the vehicle. Use the gray Flyffy cloth included in the set for the paint. For the car glass, use a microfiber cloth or the blue Nanotol microfiber cloth included in the set.
TIP: Heat improves the result. So enjoy working in the sun. Polishing with the microfiber cloth also generates heat.
If you use Nanotol Auto, Boot & Freizeit 1 + 2 without first applying a basic coating with Nanotol Protector, repeat the process described above twice. The first time it is cleaned and the second time the coating is applied.
