Nano coating for hospitality industry and rental furniture.
Nanotol for textiles forms an invisible protective layer
on furniture and table linen
The breathable easy-to-clean coating reduces stains caused by dirt and mold.
Nano coating for hospitality and rental furniture.
Nanotol for textiles forms an invisible protective layer
on fabric panels
The breathable easy-to-clean coating protects against stains and maintains the value.
DIY - nano-coating for rental furniture and textiles frequently used in hospitality and hotel industry.
Nanotol is a breathable easy-to-clean nano-coating for textiles that are frequently used and still need to maintain a high-quality, clean look. The long-term nano-coating makes textile fibers moisture resistant and dirt repellent. Stains or discolorations, e.g. from trousers abrasion, are minimized and can be easily removed.
Try it out now!
Nanotol Protector for Textiles
different sizes
Suitable for
- Garden textiles, such as cushions, seat cushions, pallet cushions, garden sofa etc, which have a water absorbent upholstery fabric.
- Outdoor carpets that do not yet have a weatherproof coating.
- Lounge furniture
- Seat cushions
A product for all water absorbing cover fabric.
Nanotol coated fabrics or carpets remain as good as new longer because water and dirt are repelled and discoloration is absent.
Easy to apply
- No solvents, no odor
- Spray on the clean surface
- Allow to dry for 24 hours
- DONE
Coating with Nanotol Textile Protector is quick and easy.
Stain protection
Dirt repellant cover fabrics.
Nanotol coats each individual fiber of the textiles with nanoparticles and prevents the penetration of dirt. As a result, the dirt lies only loosely on top and can be removed easily and gently.
Proven quality
No optical change of the surface.
Intelligent fiber protection, ultra-thin , without solvents and therefore completely odorless. Nanotol is OEKO-TEX® certified, mild on skin and food safe.
Water repellent
Protection against soaking.
The nanoparticles change the surface so that water can no longer penetrate the textile fiber or leather. Spherical drops form on the surface and run off.
breathable
No layer formation on the surface.
Unlike conventional impregnations, Nanotol does not lie on top as a layer, but penetrates the textile or leather. Interstices remain open so that air can continue to circulate.
Depending on absorbency, sufficient for approx. 1 m²
-
Depending on absorbency, sufficient for approx. 2 m²
Depending on absorbency, sufficient for approx. 5 m²
This is how easy it is to apply Nanotol Protector for textiles
Nanotol Protector for textiles is a professional nano-coating for outdoor cover fabrics. It is ideally suited if the upholstery fabric has no weather resistant finishing and therefore absorbs water (a drop of water penetrates).
- The substrate must be clean and free of other coatings that could prevent the aqueous coating from being absorbed by the textile fibers or leather.
- Nanotol Protector for textiles is sprayed evenly onto the surface at a distance of approx. 15 cm until saturation is reached.
- Allow Nanotol Protector to dry. After 24 hours, the coating process is complete.
General questions about Nanotol
How long does Nanotol nano coating last on outdooor textiles?
Nanotol Protector for textiles is only affected by abrasion. In places where there is no abrasion, the effect will last for many years. In places that are used frequently (your favourite place on the couch), the coating effect will wear off at some point. You can partially recoat it without seeing a transition. If you notice wear, simply spray Nanotol Protector for textiles on these areas again. The nano coating only penetrates the areas that have already absorbed water again. After that, the protection is complete again.
Nanotol is also washable. Please use a mild detergent for cleaning.
How much of the Protector do I need for a couch or an armchair?
The coverage of Nanotol Protector for textiles is 10-20 m² per litre.
This is because different materials can absorb different amounts of water. Some absorb more of the proctor and some less. However, the fabric should always be saturated.
We recommend approx. 1 litre for a couch. If you still have Nanotol left over, use it for your shoes or garden cushions for example.
How long does Nanotol take to dry?
Nanotol Protector for textiles needs 24 hours to polymerise completely.
How to clean furniture fabrics coated with Nanotol
Nanotol is washable. Please use a mild detergent for cleaning. The nanopolymer coating makes it very easy to remove dirt or stains, as they have not penetrated the textile fibre, but only lie on top.