2in1 for long-lasting hygienic cleanliness
Product Benefits:
Apply the Product
Spray Nanotol Screens & Glasses 2in1 evenly onto the surface.
Distribute and Clean
Spread the liquid with a damp cloth and allow the surfactants to work for 10-15 seconds.
Rinse Thoroughly
Remove the product and loosened dirt with plenty of water.
For glasses, rinse under running water.
For electronic devices, gently wipe the surface with a clean, damp cloth.
Dry and Activate the Coating
Dry the surface thoroughly. For glass surfaces, use a microfiber cloth. The microfiber activates the nanopolymer coating, leaving the surface exceptionally smooth and clear.
Tip: Warm temperatures enhance the coating performance. The product can be applied in direct sunlight, and polishing with a microfiber cloth generates additional heat, further supporting the coating process.
Important
If you are using Nanotol Screens & Glasses 2in1 without first applying a base coating with Nanotol Cleaner & Protector, repeat the entire process twice:
After applying the base coat, you've set the perfect foundation for a long-lasting effect. Nanotol requires a clean surface to penetrate the pores effectively. If you use Nanotol Screens & Glasses 2in1 without a base coat and notice an uneven effect, it's advisable to apply the base coat afterward.
How often you need to refresh depends on the chemical or mechanical wear on the surface, which can vary greatly. Whenever the effect starts to diminish, meaning dirt can no longer be removed in seconds, you should treat the affected surface with Nanol 2in1. In between, a dry microfiber cloth is sufficient for cleaning.
Manufacturer: CeNano GmbH & Co. KG, Paul-Huber-Str. 5, 84405 Dorfen, Germany
Contact: info@cenano.de
from 6,90 € *
Refresh Your Coating with Screens and Glasses 2in1
Nanocoating can be continuously maintained and refreshed with Nanotol Screens & Glasses 2in1.
It is ideal to clean your screens and glasses once a week with Nanotol 2in1. This process rejuvenates the Nanotol effect time and again, keeping the surface hygienically clean.
Nanotol 2in1 cleans and coats quickly and simultaneously. Just spray, spread, rinse. Dry with a microfiber cloth.
Nanotol Screens & Glasses 2in1
* All prices are stated gross, including 19% VAT. If you are logged in with an address from an EU country, then the prices will be stated including your country-specific VAT. If you are logged in as a company with a valid VAT ID from an EU country (not Germany) or from a country outside the EU, the prices will be stated without VAT.
All prices are to be understood plus shipping costs. Shipping to Germany is free for orders over 50€.
