Nano coating for tiles
Nanotol Sanitary Protector forms an invisible protective layer on tiles
Water runs off better and tiles are much easier to clean for many years.
Apply Nanotol coating for tiles yourself
The tile surface should be protected to retain its pristine appearance for a long time. Acids and alkalis, but also plastering, make the surfaces rough over the years. The rougher the surface, the easier it is for new dirt to settle and the more effort is needed to remove it. A vicious circle that can be interrupted by a nano coating.
Depending on whether a tile can still absorb water (stoneware, earthenware, terracotta or natural stone tiles) or whether the surface can no longer absorb water (glazed tiles, porcelain stoneware), there are different nano coatings.
ATTENTION: Differentiate between
Tiles that cannot absorb water
For glazed tiles and porcelain stoneware, Nanotol Sanitary Protector creates an enhancement effect that can be renewed again and again, for a lifetime.
Nanotol Sanitary Protector permanently reduces the adhesion of limescale because water can runs off better and water spots can be removed quickly and in an environmentally friendly way, just with a cloth.
Tiles that can absorb water
For tiles that are water-absorbent (open-pored surface), Nanotol Protector for mineral surfaces provides impregnating protection.
If you are unsure whether your tile can absorb water, do the drop test:
Does a drop of water on the surface leave a slightly darker stain? Then water can penetrate, even if it is very little.
ACHTUNG: Unterscheiden Sie
Tiles that cannot absorb water,
should be protected with Nanotol Sanitary Set.
Tiles that can absorb water,
should be coated with Nanotol Protector for mineral surfaces.
Nanotol Sanitary Protector is suitable for
- Porcelain stoneware tiles
- Glass and mirror tiles
- Glazed tiles
Attention: Nanotol Sanitary Protector smoothens the surface so that water can run off more easily. This advantage brings with it a risk of slipping with floor tiles. This can lead to falls and injuries in the bathroom when walking with bare feet.
Therefore we recommend to coat only wall tiles with Nanotol Sanitary Protector!
Nanotol Protector for mineral surfaces is suitable for
- Earthenware tiles, stoneware tiles
- Terracotta tiles
- Natural stone tiles
Nanotol Protector for mineral surfaces makes the surface water-repellent but not waterproof.
No tedious scrubbing anymore! Nanotol fills the pores of the surface and smoothens them perceptibly. Dirt and limescale no longer bond with the surface and can be removed with water.
Harsh cleaning agents are no longer needed. Surfaces can be cleaning without any scratches. The gloss of the tiles is kept for many years.
No more agressive cleaning agentsi
Abrasive cleaner to remove limescale is not needed. The ceramic surface remains nice and as good as new, without scratches.
The effect lasts for many years
One-time basic nano coating.
After the one-time basic coating, the Nanotol effect lasts for good, just by using Nanotol 1+2.
The one-time basic coating forms the basis for the protective layer that will last for years. The set contains everything needed for the basic coating:
- Cleaner + descaler
- Nano coating
Care and Refreshment
Instead of your previous sanitary cleaner, use Nanotol 1+2 for regular cleaning. Nanotol 1+2 cleans and coats in one step and refills imperfections.
Nanotol 2in1 is simply sprayed onto the wet surface, spread with a cloth and then washed off again with the dissolved dirt. That's all!
Die einmalige Grundversiegelung bildet die Basis für die jahrelange Schutzschicht.. Das Set enthält alles, was für die Grundversiegelung benötigt wird
Alle 6-9 Monate empfehlen wir eine Auffrischung. Nanotol 2in1 reinigt und versiegelt in einem Schritt und füllt Fehlstellen wieder auf. Bereits versiegelte Oberflächen bleiben länger aktiv und Schmutz abweisend - solange Sie möchten.
Nanotol 2in1 wird einfach auf das nasse Auto aufgesprüht, mit einem Tuch verteilt und dann mit dem gelösten Schmutz wieder abgespült. Das ist alles!
What else you should know about Nanotol sanitary coating
Nano coating faucets
Everyone likes to use high-quality, shiny and hygienically clean faucets. Once protected with Nanotol they can be cleaned in seconds with a microfibre cloth without cleaning agents. They look nice and classy instantly.
Coating genuine and plastic glass showers
Nanotol protects shower cabins against limescale and dirt deposits. Unlike shower glass that has been refined in factories, Nanotol nano coating on showers can be maintained for a lifetime, reduces water stains and makes cleaning easier. Radiant cleanliness and crystal glass effect are easily achievable. The Nanotol system convinces with its long durability and simple application.
Nanotol is harmless
Nanotol has been tested many times. Unlike conventional nano coatings, Nanotol covers the surface like a net - there are no chemical compounds, vapours or odours. The nanoparticles cannot dissolve and are completely harmless to humans.
General questions about Nanotol
Here are questions that do not concern a specific application with Nanotol:
How long does the nano coating last on tiles?
The basic coating with the Nanotol Sanitary Set and regular care with Nanotol Sanitary 1+2 can maintain a lifelong Nanotol effect.
Why are there different nano coatings for tiles that absorb water and tiles that cannot absorb water?
The nano coatings differ in terms of how the nanoparticles can attach to the surface.
For tiles that cannot absorb water, the nanopolymers occupy the pores of the surface and fill them up, making the surface even smoother. For this you need Nanotol Sanitary Products.
On tiles that can absorb water, the nano coating deeply penetrates into the material. After drying, the nanoparticles remain inside the pores. For this you need Nanotol Protector for Mineral Surfaces.