Nano coating for glass and plastic showers
Nanotol Sanitary Protector forms a longlasting, invisible protective layer on your shower cabin
Water runs off better and the entire shower is much easier to clean for many years.
Nano coating for glass and plastic showers
Nanotol Sanitary Protector forms a longlasting, invisible protective layer on your shower cabin
Water runs off better and the entire shower is much easier to clean for many years.
Apply nano coating for shower cabins yourself
Nanotol is the first universal nano coating that permanently reduces the adhesion of limescale on real glass and plastic showers. The surfaces are prepared by nanopolymers in such a way that water runs off far better. There is less water spotting which can be removed quickly and in an environmentally friendly way, just with a cloth. Since 2005, Nanotol has excited thousands of customers who use the "do-it-yourself method" to protect their shower cabins and bathroom ceramics from limescale and ageing. Sparkling cleanliness and a crystal glass effect are easy to achieve. The Nanotol system convinces with its long durability and simple application
Be demanding!
Shower cabin basic coating with Nanotol Sanitary Set
Care and refreshment with Nanotol Sanitary 2in1
Suitable for
- Shower cabins, shower doors, bath attachments
- Real glass showers and plastic glass showers
- Clear glass showers, satin glass showers, structured glass showers
- Interior and exterior
One product for all surfaces. You no longer need different nano coatings!
Showers coated with Nanotol age slower because easy cleaning with water keeps the surface smooth and as good as new.
Easy to apply
- One time basic nano coating
- No odour formation as no solvents are contained
- Coated showers are usuable instantly
- Inexpensive care products for refreshing
The basic nano coating with the Nanotol Sanitary set is done quickly and easily after cleaning. You do not need any protective equipment, applicators or machines, only a microfiber cloth.
50% less cleaning
Less water spots
Nanotol fills the pores of the surface and smoothes them perceptibly. Water can therefore run off more easily.
80% faster cleaning
Easy-to-clean surface
Limescale no longer bonds with the surface and can be removed very quickly and easily. All you need is water and a microfiber cloth.
Save 90 % cleaning agent
You only need water
Surfaces coated with Nanotol can be cleaned without cleaning agents. Dirt and limescale is simply removed with a damp cloth.
The effect lasts for many years
One-time basic nano coating
After the basic coating, the effect lasts for good if you use Nanotol 1+2.
Regular care and refreshment
After the basic coating, use Nanotol 1+2, if required!
Basic coating set for 40 m²
Sufficient for a complete bathroom with shower cabin, sink, toilet, faucets-
-
-
2 plus 1 FREE
-
-
-
-
Basic coating set for 80 m²
Sufficient for two bathrooms with shower cabin, sink, toilet, faucetsBasic coating set for 160 m²
The right set for hotels and hostels that want to save cleaning time.
1000 ml für 160 m²
500 ml für 80 m²
It's so easy to nano coat your shower with Nanotol
Nanotol Sanitary Protector is a professional nano coating for all surfaces in bathrooms.
Procedure of Nanotol basic coating:
- Thorough pre-cleaning and descaling with Nanotol Sanitary Cleaner.
- Application of Nanotol Sanitary Protector
- Activation of the nanopolymers using Nanotol microfiber cloth
All necessary components are included in the Nanotol Sanitary Set
Basic coating
The one-time basic coating forms the basis for the protective layer that will last for years. The set contains everything needed for the basic coating:
- Cleaner + descaler
- Nano coating
- Cloths
Care and Refreshment
Instead of your previous sanitary cleaner, use Nanotol 1+2 for regular cleaning. Nanotol 1+2 cleans and coats in one step and refills imperfections.
Nanotol 2in1 is simply sprayed onto the wet surface, spread with a cloth and then washed off again with the dissolved dirt. That's all!
GRUNDVERSIEGELUNG
Die einmalige Grundversiegelung bildet die Basis für die jahrelange Schutzschicht.. Das Set enthält alles, was für die Grundversiegelung benötigt wird
- Vorreiniger
- Nanoversiegelung
- Poliertücher
AUFFRISCHUNG
Alle 6-9 Monate empfehlen wir eine Auffrischung. Nanotol 2in1 reinigt und versiegelt in einem Schritt und füllt Fehlstellen wieder auf. Bereits versiegelte Oberflächen bleiben länger aktiv und Schmutz abweisend - solange Sie möchten.
Nanotol 2in1 wird einfach auf das nasse Auto aufgesprüht, mit einem Tuch verteilt und dann mit dem gelösten Schmutz wieder abgespült. Das ist alles!
-
-
What else you should know about Nanotol sanitary coating
Nano coating tiles
Glazed tiles, i.e. tiles with a closed surface, can also be coated with Nanotol Sanitary Protector to prevent limescale build-up.
- Easier cleaning
- Hygienically clean, smooth surface
- High-quality appearance
- No more harsh cleaning agents
Nano coating faucets
Everyone likes to use high-quality, shiny and hygienically clean faucets. Once protected with Nanotol they can be cleaned in seconds with a microfibre cloth without cleaning agents. They look nice and classy instantly.
Nanotol is harmless
Nanotol has been tested many times. Unlike conventional nano coatings, Nanotol covers the surface like a net - there are no chemical compounds, vapours or odours. The nanoparticles cannot dissolve and are completely harmless to humans.
General questions about Nanotol
How long does the nano coating last on a shower glass?
The basic coating with the Nanotol Sanitary Set and regular care with Nanotol Sanitary 1+2 can maintain a lifelong Nanotol effect.
Why is regular refreshing with Nanotol Sanitär 1+2 necessary
Unlike a window, the shower glass is stressed every time you shower. On the one hand, soap (foam from hair shampoo, etc.) runs over the Nanotol coating and on the other hand, water containing lime gets onto the surface every day. In the long run, both of these factors damage the coating and the effect wears off over time.
As a preventive measure, we therefore recommend cleaning every 1-2 weeks with Nanotol Sanitary 1+2 to remove any limescale that has already settled and to replenish any imperfections in the coating.
Why do some drops of water still stick?
Nanotol coating noticeably smoothes the surface of the shower glass. Gravity ensures that the water contracts and runs off. The more evenly the coating is applied, the more water runs off.
If a drop is very small, e.g. due to splashing water, it is not heavy enough, sticks and dries on the shower glass leaving a water stain. To minimise this, we recommend:
- Rinse off the shower glass after you have showered to "take along" splash water drops.
- Don't worry about possible water stains, because the limescale can no longer bond with the shower glass. You can wipe off the stain even after it has dried.
Why does the Nanotol beading effect look different from other nano coatings?
The angle between the surface of the substrate and the surface of the water droplet on it is decisive for the repellency or lotus effect. The contact angle is a measure for the wettability of the surface with water.
Super hydrophobic surfaces are characterized by big contact angles. The actual contact area is only two to three percent of the surface covered by a water droplet. The drop lies as if on a bed of nails made of crayons and touches only their tips. This decreases the attraction between the water and the substrate, the water droplets become round. They slide off at the lowest angle of inclination. The surface does not get wet.
In the development of Nanotol a great effort was made to leave the contact angle large enough to retain the self-cleaning effect but to enable the user to clean the surface with water.
Therefore, surfaces coated with Nanotol are water repellent but do not have an extreme lotus effect. A major benefit is that such surfaces are very easy to clean because water removes dirt and slides off.
Can I also coat my windows or car with Nantol Sanitary?
Nanotol Sanitary Protector can also be used on window glass or car glass. Nanotol Sanitary Cleaner, however, is acidic to dissolve limescale. Therefore, do not use it on window frames or car paint. The same applies to Nanotol Sanitary 1+2.
Please use the specific Nanotol Cleaner to prepare the surface and the specific Nanotol 1+2 care products to refresh the Nanotol coating.
Why doesn't water drips off?
If you do not have the beading effect, this may be due to the following reasons.
- the coating could not attach properly because either due to lime residues left on the surface or another precleaner was used, e.g. a glass cleaner containing alcohol or a descaler. Please do not use any other precleaner and allow Nanotol Cleaner enough time to soak, so that limescale can be chemically decomposed. The dissolved limescale should be removed with a rough sponge and rinsed off with plenty of water.
- the nanopolymers have not been sufficiently activated. This is done by polishing with the microfibre cloth. The Nanotol microfibre cloth applies heat via its rough surface, through which the activation takes place. You can feel the activation when the glass becomes ultra-smooth and the cloth glides easily over the surface. Please do not use any other cloths for this purpose.
- drops left on the glass are too small and light to run off. Please rinse off the shower glass briefly after you finished with showering. > 95% of the remaining water will drip off. Dry the remaining drops, wipe away or simply leave to dry, as limescale can no longer bond firmly to the glass. Lime stains can be easily removed with a damp microfibre cloth on a properly coated surface.
Please make sure not to use conventional bathroom cleaners on glass anymore, because they also contain anionic surfactants and alcohol. Instead, use Nanotol Sanitary 2in1. You clean hygienically, preserve the coating and refresh it again and again. Nanotol 2in1 cleans and coats at the same time and quickly. Spray on, spread and rinse off. Dry with a microfibre cloth. You only need to do this once in a while when the effect wears off.
You can check for yourself whether the coating was able to attach correctly, by touching the surface compared to another (similar) surface. The coated surface must be clearly, noticeably smoother. If this is not the case, the coating could not attach or penetrate the pores. In this case, please repeat the procedure as described above.
Where is the difference between the products in the catagories Car, Household and Sanitary?
In order for Nanotol Protector to attach evenly, the surface must be very clean before coating. The pre-treatment/cleaning is therefore very important and differs. In the sanitary area, there are usually limescale residues on the surface, for instance in shower cubicles. It is imperative that these are removed. That is why our Nanotol Cleaner for the sanitary area is acidic. Dirt on cars is often very stubborn. Here, too, the Nanotol Cleaner is effective. In the household area, there are very sensitive surfaces that need to be cleaned carefully. The Cleaner from the household category is therefore very gentle.
Each category has its own Cleaner, which is ideal for preparing the surface for subsequent coating. All cleaners contain no anionic surfactants, no alcohols or solvents and are easily biodegradable.
Consequently, the 2in1 products in the categories also differ because they clean and freshen up.
Stone surfaces can be prepared for Nanotol Protector Mineral Surfaces with a high-pressure cleaner. Textiles are washed and rinsed well before coating with Nanotol Textile Protector. There is no special cleaner for these two areas. However, both can be cleaned with Nanotol Household Cleaner in case of stubborn stains.
