Nanotol set for the bathroom. Clean longer - clean faster - less lime stains.

Nano-coatingset for basic coating of shower glass, ceramic washbasins, fittings and tiles.

Complete set including cleaning, descaling and nano-coating.

 

Product information Nanotol Sanitary Set

Type of Product	Set for nano coating sanitary areas
Sizes available	5 m², 40 m², 80 m²,  160 m²
Content	Nanotol Sanitary Cleaner, Nanotol Sanitary Protector, 2 microfiber polishing cloths
Preserving the Nanotol effect	Nanotol Sanitary 2in1

 

  

Our Nanotol sets are carefree sets for cleaning and nano coating your bathroom and sanitary area. Not only you can clean deeply, but you even protect sensitive surfaces against dirt and limescale – water runs off easily thanks to the Nanotol lotus effect.

Nanotol coated bathrooms are easier to clean and stay clean much longer.

The Nanotol System

for your Bathroom

1 - Cleaning

Product Information

Nanotol Sanitary Cleaner

Tiny nanopolymers can only enter the pores of the surface when they are really clean and without any limescale. Nanotol Sanitary Cleaner cleans with high quality, nonionic surfactants and decalcifies gently but thoroughly. The Cleaner ideally prepares shower glass, sinks, faucets or tiles for sealing with Nanotol Protector.

Nanotol Cleaner is easily biodegradable, chemically active and cleans hygienically.

2 - Nano Coating

Product Information

Nanotol Sanitary Protector

After cleaning the surface, tiny nanopolymers „fill“ the pores. Nanotol Protector should be applied thinly and as soon as the surface has dried, it needs to be polished with a microfiber cloth. This activates nano particles and smoothens the surface. Limescale and dirt can no longer firmly bond to the surface.

The effect of the nano coating can be replenished from time to time and lasts many years.

1+2 - Renewing

Product Information

Nanotol Sanitary 2in1

Instead of a conventional sanitary cleaner, use Nanotol Sanitary 2in1 in future. It cleans hygienically and prolongs the nano coating effect every time it is used.

Nanotol 2in1 quickly cleans and coats . Just spray, apply all over and rinse off. Dry with a microfiber cloth

 

Sets for basic coating with Nanotol Cleaner und Nanotol Protector

3 Set sizes

Nanotol Sanitary Set
"M“ - 39,90 €

buy now

 

Cleaning and Coating for approx. 40m²

Set-Content:

• 125 ml (Step 1) Nanotol Sanitary Cleaner Concentrate
• 250 ml (Step 2) Nanotol Sanitary Protector for 40 m²
• 1000ml spray bottle with Cleaner (Step 1 - ready to use) and for multiple refill
• 2 sponge cloths
• 2 Nanotol high tech microfiber cloths
• User manual

 

Nanotol Sanitary Set
„L“ - 59,90 €

buy now

 

Cleaning and Nano coating for approx. 40m²

Set-Content:

• 250 ml (Step 1) Nanotol Sanitary Cleaner Concentrate
• 500 ml (Step 2) Nanotol Sanitary Protector for 80 m²
• 1000ml spray bottle with Cleaner (Step 1 - ready to use) and for multiple refill
• 2 sponge cloths
• 2 Nanotol high tech microfiber cloths
• User manual

 

Nanotol Sanitary Set
„XL“ - 99,90 €

buy now

 

Cleaning and Nano coating for approx. 160m²

Set-Content:

• 500 ml (Step 1) Nanotol Sanitary Cleaner Concentrate
• 1000 ml (Step 2) Nanotol Sanitary Protector for 160 m²
• 1000ml spray bottle with Cleaner (Step 1 - ready to use) and for multiple refill
• 2 sponge cloths
• 2 Nanotol high tech microfiber cloths
• User manual

 

 

 

Great for bathroom and sanitary area

• bathtub
• bidet
• ceramic
• chrome
• faucet
• glass ceramic
• high gloss surfaces
• shower basin
• shower cubicle
• shower glass
• shower partition
• sink
• smooth wood
• stainless steel
• taps
• toilet
• toilet lid
• urinal
• washbasin
• washstand
• wc
• wc seat

'0'

How to use Nanotol Sanitary Set

The set includes two bottles of cleaner (1).

The small bottle contains the detergent concentrate.
The large bottle already contains diluted detergent. You can spray this directly onto the surface with the spray gun. Remove the screw cap and replace it with the enclosed spray gun.
Mix again: As soon as the large bottle is empty, fill 2-4 caps of the cleaner concentrate from the small bottle into the large bottle and fill it up with water. The cleaner stays clean in the spray bottle and can be refilled several times.
TIP: Depending on the degree of calcification, the cleaner can be dosed higher or lower. For normal calcification, 2 caps are sufficient when refilling in the blender bottle.

CLEANING

1. Wet the surface.
2. Spray the diluted cleaner on the wet, dirty surface.
3. Spread the cleaner and let it work for 30-60 seconds. Use the blue sponge cloth included in the set.
4. Rinse: Wash off Nanotol Cleaner, lime scale and dirt with plenty of water.
5. Dry off the surface. Use a lint-free cloth, a squeegee or the blue Nanotol microfiber cloth included in the set.

COATING

1. Spray Nanotol Protector on the clean surface. Approx. 4 sprays per square meter.
2. Spread the seal very thinly with a clean, lint-free cloth. Ideally, use the white sponge cloth included in the set. Moisten this lightly beforehand to make it smoother. Do this partially to ensure even distribution. You can take your time for this.
   TIP: Proceed "like a checkerboard" - once from left to right and once from top to bottom.
3. Let dry. A gray haze forms, but it is difficult to see on light and transparent surfaces.
4. Polish the surface with a high quality microfiber cloth for glass until the surface has become noticeably smoother. Ideally, use the white Nanotol microfiber cloth included in the set.
   TIP: If the cloth "slips" over the surface, you have sufficiently activated the Nanotol protective layer.

The Nanotol System

for your Bathroom

1 - Cleaning

Product Information

Nanotol Sanitary Cleaner

Tiny nanopolymers can only enter the pores of the surface when they are really clean and without any limescale. Nanotol Sanitary Cleaner cleans with high quality, nonionic surfactants and decalcifies gently but thoroughly. The Cleaner ideally prepares shower glass, sinks, faucets or tiles for sealing with Nanotol Protector.

Nanotol Cleaner is easily biodegradable, chemically active and cleans hygienically.

2 - Nano coating

Product Information

Nanotol Sanitary Protector

After cleaning the surface, tiny nanopolymers „fill“ the pores. Nanotol Protector should be applied thinly and as soon as the surface has dried, it needs to be polished with a microfiber cloth. This activates nano particles and smoothens the surface. Limescale and dirt can no longer firmly bond to the surface.

The effect of the nano coating can be replenished from time to time and lasts many years.

1+2 - Renewing

Product Information

Nanotol Sanitary 2in1

Instead of a conventional sanitary cleaner, use Nanotol Sanitary 2in1 in future. It cleans hygienically and prolongs the sealing effect every time it is used.

Nanotol 2in1 quickly cleans and coats. Just spray, apply all over and rinse off. Dry with a microfiber cloth

Nanotol water repellant effect