0,00 € 0

Cart

No products in the cart.

Nanotol Nano Coating
for touch-displays

Protection against dirt and scratches

Nanotol Screens and Glasses forms an invisible protective layer on display surfaces that are frequently touched.

This makes them dirt-repellent, stay clean longer, and can be hygienically cleaned without cleaning agents.

On this page

Touch-Display, das mit einer Nanoversiegelung beschichtet ist, wird mit Zeigefinger berührt
TOUCHSCREEN
Finger berührt ein Touch Modul einer Kochmulde
GLASKERAMIK
INFO-TAFELN
TERMINAL
My boss and the other employees are thrilled with it. We have equipped all showroom devices with it so that they are less scratched until they are replaced.
Trusted Shops

Nano Coating for Touch-Displays

Touch display surfaces at terminals, ticket machines, or public monitors are touched by many hands and are therefore often unhygienic. Additionally, they quickly look unappealing due to fingerprints and other dirt. Nanotol Nanocoating allows for quick cleaning in between, simply with a dry cloth.

Simple, cost-effective, effective!
One time base coating kit
More information about the kit
Refresher
More information about the quick-coating

The 4 most important advantages of a nanocoating on Touchdisplays

50% less cleaning.

Longer-lasting clean touch displays Nanotol fills the pores of the display glass and noticeably smooths it. As a result, grease and dirt adhere less and can be removed very easily.

Visually high-quality appearance

Crystal Glass Effect - By smoothing the surface, display surfaces appear high-quality and new. Glass looks clean and elegant, like crystal glass.

Clean 80% faster

Easy-to-clean Effect - Grease and dirt no longer bond with the surface and can be removed very quickly and easily with a microfiber cloth.

Higher transmission rate

Better Contrast - Nanotol increases the transmission rate. As a result, glass surfaces allow more light to pass through - images appear sharper and have more contrast. Additionally, touch sensitivity is slightly increased, making usage easier.

Base Coating Kit

How to use the kit

Nanotol Screens & Glasses Cleaner

Prep your surfaces for ultimate protection! Nanotol Screens & Glasses Cleaner uses high-quality non-ionic surfactants to gently yet thoroughly remove any grime, ensuring the nanoparticles in our Nano Coating can penetrate deeply. This cleaner is the perfect first step for achieving long-lasting, hygienic cleanliness.

Nanotol Cleaner is readily biodegradable, chemically active, and delivers a truly hygienic clean. ATP measurements have confirmed its germ-free results.

Nanotol Screens & Glasses Protector Tiny nanoparticles occupy and fill the pores after cleaning. Nanotol Protector is spread thinly on the surface and, after drying, polished with a microfiber cloth. This activates the nanoparticles and the surface is immediately noticeably smoother. Water and dirt can no longer adhere firmly. This base coat is only necessary once and can then be maintained with Nanotol 1+2.
  • 1 HighTech microfiber cloth
  • Instructions for use

My glasses stay brilliantly clean for months with just a simple wipe of the cleaning cloth.
My tablet and my monitor got super clean, and I only need to wipe my display quickly with a cloth and I have a clean surface.
The lenses really do stay clean for a long time and are less prone to dust and dirt. The products are very easy to handle.
The coating is simply outstanding in its effect. And the cleaning agent can be used extremely sparingly and is very effective.
The initial coating with the kit creates the foundation for years of protective coating.
The set contains everything that is needed for the base coating. Available in different sizes - depending on the application area.

The Nanotol System for Screens and Glasses

Every smooth and non-absorbent surface is treated in the same way in principle.

One-time base coating

1. Thoroughly clean surfaces.
2. Apply and polish the coating.

Easier cleaning

After the coating, any dirt (including grease) can be completely removed dry with the included HighTech microfiber cloth for many weeks. Hygienically clean glasses and displays in seconds with one wipe.

1+2 Refresh when needed

If you notice the effect diminishing, you can easily and quickly refresh it. With Nanotol 2in1, you clean and coat the surface again - all in one step.

TOUCHSCREEN CLEANER WITH LOTUS EFFECT

After the initial coating, you can remove dirt, such as fingerprints, with a dry microfiber cloth.

The Nanotol effect can be refreshed repeatedly with Nanotol 2in1. By regularly using Nanotol 1+2, the effect of the Nanotol coating is permanently maintained.

Nanotol 1+2 cleans and coats simultaneously and quickly. Spray on, spread, and wipe with a microfiber cloth.

Various Sizes for Different Applications

50 ml

Range: 8 m²
6,90 *
138 € *
Select

125 ml

Range: 20 m²
9,90 € *
79,20 €/l *
Select

250 ml + Refill Canister 5 Liter

Range: 840 m²
129,90 € *
24,74 € *
Select
*Prices include VAT but not shipping costs.*

Great product. Easy to use. I highly recommend it!
The absolute best glasses cleaner
Just amazing!
Uncomplicated application with totally brilliant results. I highly recommend this product!
Very satisfied. I use it on my glasses, smartphone, iPad, and smartwatch.
Nanotol Screens & Glasses 2in1 replaces your previous glasses cleaners.
Nanotol Screens and Glasses 2in1 is used after the base coating. Maintains the effect for many years.
Can also be used on uncoated glasses to make subsequent cleaning easier.

Suitable for

  • Public monitors indoors and outdoors
  • Electronic display devices
  • Display boards, advertising boards, information boards
  • Digital outdoor advertising, A-frame signs
  • Outdoor LED advertising boards
You can coat all display surfaces, whether the display is made of glass or plastic, and whether it is an indoor or outdoor screen.

How to easily coat your touchdisplays with Nanotol Nanocoating

Clean the display with Nanotol Cleaner (1)

Spray the cleaner carefully on the display and optionally on the back. Spread the cleaner and wipe off dirt and cleaner residues with the microfiber cloth.

Apply the nanocoating Nanotol Protector (2)

Spray the protector evenly on the display, spread the liquid, and let it dry. A slight gray haze will form.

Activate the nanopolymers with the Nanotol microfiber cloth

After drying, polish the display with the microfiber cloth until the gray haze is gone. This activates the nanopolymers, and you will feel the surface smooth out.

All Nanotol Screens & Glasses Products

All the ways you can use Nanotol for Screens & Glasses

Glasses

The nano coating ensures your lenses stay cleaner for longer, are easier to clean, and are protected against grease and scratches.
Learn more about Nanotol for Glasses

Smartphones and Tablets

Fingerprints wipe away effortlessly, leaving a hygienically clean surface with a high-quality shine.
Learn more about Nanotol for Smartphones and Tablets

Commercial Touch Screens

Enjoy clean and hygienic touchscreens effortlessly, without the need for harsh disinfectants!
Learn more about Nanotol for Commercial Touch Screens

Commercial Displays

Anti-static, stays clean longer, water and dirt-repellent surfaces, and increased light transmission.
Learn more about Nanotol for Commercial Displays

Further advantages of Nanotol Screens & Glasses Nanocoating

Higher Transmission

Glass coated with Nanotol achieves a higher transmission rate. This means that more light rays can pass through the glass unhindered and without deviation.

- Sharper images – more contrast
- Photovoltaic modules have a higher efficiency
- Clearer colors on screens

Hygienically clean exhibition devices

Daily cleaning of exhibition devices is time-consuming and costly. A surface coated with Nanotol can be hygienically cleaned simply with the Nanotol microfiber cloth. The surface of the glass, whether glasses, smartphone, or touch panel, is so smooth that dirt can be removed very easily and completely without cleaning agents.

Fewer fingerprints

Whether touch displays, public terminals, or exhibition devices, all surfaces that are frequently touched by many hands become unhygienically smeared after a short time. The coating with Nanotol reduces fingerprints and makes cleaning easier.

FAQ

Frequently asked questions about Nanotol for Screens and Glasses

With one liter of Nanotol Display Coating, you can coat 160 m² of display surface.

With one liter of Nanotol Display 1+2, you can maintain and refresh 160 m² of display surface.

Nanotol is sold exclusively directly by the manufacturer CeNano GmbH & Co. KG. When you buy through this website, you purchase the product without intermediaries, who typically multiply the cost.

With 50 ml of Nanotol Display Protector, you can coat 8 m² of display surface. The basic coating kit costs only a fraction per coated display compared to other products.

Normally, frequently touched surfaces need to be cleaned daily with cleaning agents for hygienic reasons. This is a time-consuming process that is also harmful to sensitive displays, as alcohol-based cleaners are often used to avoid streaks.

After coating with Nanotol, it is sufficient to quickly and efficiently remove dirt once a day with a dry cloth. Refreshing with Nanotol 2in1 is necessary every 1-4 weeks, and for less frequently used surfaces, only after 3 months.

The difference lies in the static charge of the outer surface.

“Normal” alcohol-based glasses cleaners or conventional cleaning agents negatively charge the surface. This results in an effect that attracts dirt and dust.

Nanotol, on the other hand, does not charge the surface but creates an antistatic layer. This repels dust, keeping the glasses cleaner for longer and making them easier to clean.

Contact
We're here and happy to help with any questions or phone orders Monday through Friday, from 08:00 AM to 06:00 PM.
Contact us
Shopservice
Information
Business Customers
Payment Methods
Delivery by

* All prices are stated gross, including 19% VAT. If you are logged in with an address from an EU country, then the prices will be stated including your country-specific VAT. If you are logged in as a company with a valid VAT ID from an EU country (not Germany) or from a country outside the EU, the prices will be stated without VAT.

All prices are to be understood plus shipping costs. Shipping to Germany is free for orders over 50€.

©2024 CeNano GmbH & Co. KG.
All rights reserved
Terms and Conditions
Imprint
Privacy Policy