Nanotol Nano Coating
for Photovoltaic and solar systems

Cleaning and Coating with ONE product for increased efficiency

A solar system coated with Nanotol becomes dirt-repellent. The modules stay clean longer, need to be cleaned less often, and thus permanently have a higher transmission rate of sunlight.

Nanotol Solar 2in1 cleans and coats all modules in one step. The result: higher efficiency and thus higher energy gains.

On this page

I have already coated my PV module. What stands out during cleaning is that the surface has become super smooth, and the rubber squeegee glides easily and effortlessly! I will do the window surfaces when it gets a bit cooler.
Mit Nanotol versiegelte Solaranlage auf einem Carport
Trusted Shops
Better effect than expected, great beading effect.
Trusted Shops

Nanocoating for photovoltaic and solar systems.

Ensure maximum yield!

Nanotol cleans and coats the surface of solar systems and photovoltaic modules. The smoother surface makes it harder for dirt to adhere. Running rain simply carries away dust.

Only clean modules generate the maximum amount of energy because they can capture more sunlight. Any dirt reduces this yield and can cause performance losses of up to 50%.

The nanocoating can be applied by yourself. You don’t need a professional and can save a lot of money. Nanotol Solar impresses with its easy application and long-lasting durability.

Better effect than expected, great beading effect.
All good!! - Thanks!

Easy to apply, and a visual success is evident, water beads off the panel wonderfully and also shows visible results in cleanness.
These products are unmatched! I've set out to clean everything in the house! I'm totally thrilled!

The 4 Key Benefits of Nanotol Nanocoating for photovoltaic and solar systems

Solaranlage auf dem Dach eines Einfamilienhauses wird mit einer Bürste an einer Teleskopstange gereinigt

Less cleaning

Longer clean solar modules Nanotol fills the pores of the glass surface and smooths it noticeably. Dirt adheres less and can be washed away by rain.

Smooth surfaces

Less bird droppings The landing place for birds on your solar system becomes uncomfortable for the birds because it is too smooth. See video below.
Nanotol Solar-coating

Maximum energy

Less dirt, less power loss Clean modules generate more energy because dirt prevents sunlight from passing through the glass.

Easy refresh

Spray – distribute – rinse
Less cleaning, faster cleaning, and simultaneously refresh the nanocoating. It doesn’t get any easier.
What our customers say about Nanotol

I currently don’t know of a better coating.

Great product. Fast processing.




The products deliver what they promise

All items as described, good packaging so everything arrived in good condition, fast shipping. I can only recommend them even though the promise that you only need to rinse off the dirt after coating is not entirely kept. I still had to touch up certain spots on alloy wheels with a cloth to get everything clean. I will continue to use this coating, it makes everything easier to clean.

I am satisfied!

Only with ionized water and a cloth. Rinse off coarse dirt, spray with Nanotol 2in1, wipe, rinse - done. No scratches from wash brush - good protection.

Fast shipping

The Nanotol products totally convince me. Even though I order from Switzerland, the delivery always arrives quickly. The entire ordering process with payment and order status works perfectly. It would be nice if all suppliers were this prompt…

Nanotol Solar Effect Video

Many thanks to Dr. Gerd Horner for allowing us to use these video recordings:

The panels are installed in Spain and were extremely contaminated by seagull and pigeon droppings. Before applying Nanotol Solar 2in1, multiple landings of these birds were observed daily. After applying Nanotol Solar 2in1, there were no more landings.

Accordingly, the panels are clean
Um dieses Video anzusehen, akzeptieren Sie bitte unsere Cookieeinstellungen

Nanotol Solar 2in1 - Quick Coating for various ranges

1L

Sufficient for app. 160 square meters

5L

Sufficient for app. 800 square meters

25L

Sufficient for app. 4000 square meters

Suitable for

  • Solar modules including frames
  • Photovoltaic systems
  • Solar roofs
  • Solar garages
A product to increase efficiency.

Nanotol coated solar modules have an extended lifespan because increased performance is still available even after many years.

Easy to apply

  • You don’t need to hire a professional for the coating unless the modules to be coated are not easily accessible
  • One-time base coating
  • Detailed instructions included
  • Affordable care products for refreshing

Scientific Test Report

Measurement results from Pr. Dr. M. Fathi (Centre de Développement des Energies Renouvelables, CDER, 42415, Tipaza, Algérie)

Read the full test report here: Nano hydrophobic coatings for Solar photovoltaic modules.

How to coat your PV and solar modules with Nanotol Quick Coating

Nanotol Solar 2in1 is a combination of cleaner and nanocoating for all surfaces on the modules. Coat not only the glass surface but also the frame so that it repels dirt and becomes easier to clean in the rain.
Here’s the best way to proceed:
  • Wet the surface with demineralized water.
  • Spray Nanotol Solar 2in1 and distribute the liquid with a cloth.
  • Rinse off dirt and cleaner with demineralized water. The nanopolymers remain in the pores.
  • Repeat the process if the modules are heavily soiled.
If you don’t have or can’t use demineralized water, you need to dry the modules with a microfiber cloth to prevent limescale from remaining on the surface.

1.

Cleaning the module by hand, if reachable.

2.

Cleaning with a telescopic pole for hard-to-reach modules. Water runs from a garden hose onto a solar panel.
Wasser läuft auf einem Gartenschlauch auf ein Solarpanel

3.

Avoid using hard water for cleaning, or dry the modules thoroughly to prevent water spots.

4.

Apply the nanocoating with a cloth or with the telescopic pole.

Done!

Your modules are now protected from dirt! Water droplets bead off a solar system.

Enjoy the effect

…and rain washes away the loose dirt.

FAQ

Frequently asked questions about Nanotol Solar 1+2

The base coating with Nanotol lasts for several years. Depending on the exposure of the surface (location of the solar system), this ranges between 3 and 8 years.

After that, you can easily and quickly refresh the coating with Nanotol 2in1 by cleaning the panels with Nanotol 2in1. Spray, distribute, rinse – done. This refresh lasts another 2-3 years.

No. Nanotol nanocoating can only bond evenly if there are no residues on the surface that could cause chemical interference. These can be caused, for example, by anionic surfactants in other cleaning agents or solvents in glass cleaners.

Nanotol Cleaner is perfectly matched to Nanotol Protector and contains very high-quality non-ionic surfactants. The cleaning result is better than with conventional standard cleaning agents. Therefore, we always recommend using the cleaner that belongs to the category for the best result. Note, the cleaners differ!

That depends a bit on the location, for example, if the solar system is near a busy road. Rain washes away most of the dirt. Therefore, you can roughly halve the frequency required before the coating.

Absolutely not. You can and should start directly with Nanotol Cleaner Step 1, as the cleaner dissolves the dirt, making it easy to remove without damaging the solar panels.

It’s best to wet the solar panel, spray Nanotol Cleaner 1 (with the ready-to-use bottle), distribute it, and let it sit for a bit (about 30 seconds) to allow the chemistry to work. After that, the dirt comes off easily.

Contact
We're here and happy to help with any questions or phone orders Monday through Friday, from 08:00 AM to 06:00 PM.
Payment Methods
Delivery by

* All prices are stated gross, including 19% VAT. If you are logged in with an address from an EU country, then the prices will be stated including your country-specific VAT. If you are logged in as a company with a valid VAT ID from an EU country (not Germany) or from a country outside the EU, the prices will be stated without VAT.

All prices are to be understood plus shipping costs. Shipping to Germany is free for orders over 50€.

©2024 CeNano GmbH & Co. KG.
All rights reserved