Is a Nanocoating Water-repellent or Waterproof?

Unlike conventional impregnations that lie as a layer on the fabric, Nanotol Nanocoating coats individual fibers. The aqueous liquid is sprayed on and penetrates the fiber. After drying, the nanoparticles remain and coat each individual fiber of the yarn. Dirt beads off together with water. Residual dirt can be easily removed (shoes). Coloring liquids, such as red wine, are not absorbed into the fiber and can be removed without residue (tablecloth, couch, carpet). Fibers cannot get wet. Mildew stains are prevented (awning, sunshade, boat cover, garden cushions). BUT: If you want to stay dry in long-term heavy rain, you need waterproof shoes. This can only be achieved through a layer-forming impregnation. If you just want to be protected in case you accidentally step into a puddle, water-repellent is better, as it also has the dirt-repellent effect. However, you should not stand in the puddle.

Are There Health Risks When Using a Nanocoating for Garden Fabrics?

No. Nanotol Protector for Fabrics and Leather is tested and certified: Tested according to § 30 and 31 LFGB* and the European Regulation (EC) No.: 1935/2004 *Food, Consumer Goods, and Feed Code. The test report shows that Nanotol contains no harmful substances and surfaces coated with Nanotol do not release substances, making them safe for direct contact with food. Tested and certified according to STANDARD 100 by OEKO-TEX® Hohenstein Textile Testing Institute (Germany) www.oeko-tex.com/standard100 (12.0.13919).

How Long Does the Nanotol Nanocoating Last on Upholstery?

Nanotol Protector for Fabrics and Leather is only affected by abrasion. In areas that have no abrasion, the effect will last for many years. In frequently used areas (your favorite spot on the couch), the coating effect will eventually diminish. You can partially recoat these areas without seeing a transition. When you notice wear, simply spray Nanotol Protector for Fabrics and Leather on these spots again. The nanocoating only penetrates areas that are already water-absorbent again. After that, the protection is complete again. Nanotol is also wash-stable. Please use a mild detergent for cleaning.

How Long Does Nanotol Take to Dry?

Nanotol Protector for Fabrics and Leather needs 24 hours to fully polymerize.

Advantages of Nanotol Nanocoating
for Upholstered Furniture

Invisible protection against stains

Say goodbye to the fear of stains and enjoy the freedom to use your home and upholstery without worry. The breathable easy-to-clean coating provides invisible protection against stains and preserves the value.

Nanocoating for Couch, Carpet, and All Upholstered Furniture for Subsequent Application at Home

Nanotol forms an invisible, water and dirt-repellent protective layer on upholstery fabrics. If liquid is spilled, it simply beads off. Dirt no longer penetrates the fibers.

The nano-impregnated surface simply repels these unwanted stains.

The difference from conventional impregnations is the unique coating of individual textile fibers. Instead of just lying on the surface, Nanotol penetrates deep into the fibers, creating a long-lasting protective barrier. This preserves the original appearance and breathability of the upholstery fabrics.

Suitable for all fabrics that can absorb water.

Learn more about suitability.

There is no better protection for fabrics and shoes, and it's even natural and solvent-free!

Absolutely no smell 👍 super, I will recommend it further.

Easiest Application and Really Good Protective Effect After First (Unintentional) Test Does what it should - very good.

And it actually doesn't stink!

Liquids simply bead off - Effect video:

Invisible protective layer on textiles and leather, water and dirt repellent. Without loss of breathability.

Um dieses Video anzusehen, akzeptieren Sie bitte unsere Cookieeinstellungen

Various Sizes of Nanotol Protector for Fabrics and Leather

500 ml - 10m²

Ideal for textile upholstered chairs, jackets, convertible tops, car seats.

Buy 500 ml

1000ml - 20m²

Ideally suited for coating upholstered furniture or carpets.

Buy 1000 ml

5 Liter- 100m²

Ideally suited for coating awnings, tents, large carpets, curtains, and multiple tablecloths.

Buy 5 Liter

The 4 most important advantages of nano-coating for upholstery fabrics

Protection Against Stains

Nanotol coats each individual fiber of the textiles with nanoparticles and prevents dirt from penetrating. As a result, dirt lies loosely on top and can be easily and gently removed.

Protection Against Mildew Stains

The nanoparticles alter the textile so that water can no longer penetrate. The fabric remains dry even in damp weather, reducing mold growth.

Harmless

Invisible protective layer Intelligent fiber protection, ultra-thin, solvent-free, and therefore completely odorless. Nanotol Fabrics Protector is OEKO-TEX® certified, skin-friendly, and food-safe.

Mehr erfahren

Breathable

No layer formation on the surface Unlike conventional impregnations, Nanotol does not lie as a layer on top but penetrates the textile or leather. Spaces remain open, allowing air to continue circulating.

For which textiles is Nanotol Fabrics Protector suitable?

One product for all water-absorbing upholstery fabrics.

Upholstered furniture with water-absorbing upholstery fabrics (leather, corduroy, velvet, Trevira, velour, etc.)
Car seats with fabric covers
Carpeting, rugs
Garden cushions
Upholstered chairs

Nanotol coated fabrics or carpets remain like new for longer because dirt is repelled and discoloration is prevented.

Easy application of the impregnation spray

The coating with Nanotol Fabrics Protector is quick and easy.

No solvents, no odor
Spray onto the clean surface
Let dry for 24 hours
DONE

Nanotol Fabrics Protector - Comparison coated vs. uncoated

Nanotol Fabrics and Leather Protector can be universally applied - one product for all application areas

Shoes & Clothing

Invisible protective layer on textiles and leather, water and dirt repellent.

Learn more

Outdoor Fabrics

Protection against penetrating moisture, no more mildew stains. Without a visible layer on the surface.

Learn more

Hospitality Industry

Heavily used rental furniture or furniture from gastro establishments stay cleaner longer and are easier to clean.

Learn more

Is Nanotol suitable for me?

Do the Drop Test

If you want to find out before purchasing whether Nanotol Protector for Fabrics is suitable for your application, do the Drop Test:

Drop water onto the fabric or leather you want to coat

Wait to see if the water is absorbed by the fabric

If the water does not penetrate on its own, you can help with a little pressure (sponge, cloth, brush)

Nanotol is suitable

if the fabric has absorbed the water. Then Nanotol Fabrics Protector can also penetrate and adhere.

Nanotol is not suitable

if the water could not penetrate. Then there may already be a coating on the fabric or the fiber composition contains too much plastic (polyester, polyamide, polyacrylic, elastane, Lycra, etc.), which cannot absorb water. In this case, Nanotol cannot penetrate and would not work.

FAQ

Frequently Asked Questions about Nanocoating for Shoes and Clothing

Unlike conventional impregnations that lie as a layer on the fabric, Nanotol nanocoating surrounds individual fibers. The aqueous liquid is sprayed on and penetrates the fiber. After drying, the nanoparticles remain and coat each individual fiber of the yarn.

Dirt beads off together with water. Residual dirt can be easily removed (shoes).
Coloring liquids, such as red wine, are not absorbed by the fiber and can be removed without residue (tablecloth, couch, carpet).
Fibers cannot get wet. Mildew stains are prevented (awning, sunshade, boat cover, garden cushions).
BUT: If you want to stay dry in continuous rain, you need waterproof shoes. This can only be achieved through a layer-forming impregnation. If you just want to be protected in case you accidentally step into a puddle, water-repellent is better, as it also has a dirt-repellent effect. However, you should not stand in the puddle.

No. Nanotol Protector for Fabrics is tested and certified:

Tested according to § 30 and 31 LFGB* and the European Regulation (EC) No.: 1935/2004 *Food, Consumer Goods and Feed Code. The test report confirms that Nanotol contains no harmful substances and that surfaces coated with Nanotol do not release substances, making them safe for direct contact with food.
Tested and certified according to STANDARD 100 by OEKO-TEX® Hohenstein Textile Testing Institute (Germany) www.oeko-tex.com/standard100 (12.0.13919).

Nanotol Protector for Fabrics is only affected by abrasion. In areas without abrasion, the effect will last for many years. In frequently used areas (your favorite spot on the couch), the coating effect will eventually diminish. You can recoat these areas partially without seeing a transition. If you notice wear, simply spray Nanotol Protector for Fabrics on these areas again. The nanocoating only penetrates areas that are already water-absorbent again. After that, the protection is complete again.

Nanotol is also wash-resistant. Please use a mild detergent for cleaning.

The coverage of Nanotol Protector for Fabrics ranges from 10-20 m² per liter.

This is because different materials can absorb different amounts of water. Some absorb more, some less of the coating. The fabric should always be saturated.

We recommend about 1 liter for a couch. If you have any Nanotol left over, you can use the rest to coat your shoes or garden cushions.

Nanotol Protector for Fabrics takes 24 hours to fully polymerize.

Nanotol is wash-resistant. Please use a mild detergent for cleaning. Due to the nanopolymer coating, dirt or stains can be very easily removed, as they have not penetrated the textile fiber but only lie on top.

Wool can absorb water vapor inside the fiber, but the surface repels water. Therefore, it is not easy to get the coating really into the fiber. Felt behaves similarly. The surface initially repels water.

Please test Nanotol Protector for Fabrics on your wool or felt fabric to see if the water-repellent behavior meets your expectations. This depends on whether and how much Nanotol Protector could penetrate the fibers.