Nano coating for windows and conservatories
Nanotol Household forms an invisible protective layer
on window glass and window frames.
As a result, the windows stay clean longer and are much easier to clean for many years.
Apply nano coating for windows yourself
Nanotol is the first universally applicable nano coating that prepares surfaces so that they are visually enhanced, as well as environmentally friendly and easy to clean. Since 2005, Nanotol has excited thousands of customers who use the" do-it-yourself method" to protect their windows and window frames from dirt and aging. Radiant cleanliness and crystal glass effect are easily achievable. You don't need an expert for this and can save a lot of money. The Nanotol system convinces with its long durability and easy application. You don't even have to rely on an expensive window cleaning service for a new nano treatment.
Basic window nano coating with Nanotol Household Set
Care and refreshment with Nanotol Household 2in1
- Windows, skylights, conservatories
- Greenhouse, glass roof, terrace roofing
- Plastic frames, painted frames, roller shutters (plastic and metal)
- Interior and exterior
One product for all surfaces. You no longer need different nano coatings!
Nanotol coated window frames age slower because easy cleaning with water keeps the surface smooth and as good as new.
Easy to apply
- You do not need a professional for coating - do it yourself
- One time basic nano coating
- Detailed instructions enclosed
- Inexpensive care products for refreshing
The basic nano coating with the Nanotol Household set is done quickly and easily after cleaning. You do not need any protective equipment, applicators or machines, only a microfiber cloth.
50% less cleaning
Windows stay clean longer.
Nanotol fills the pores of the surface on glass and frames and smoothes them perceptibly. Dirt therefore adheres less.
80% faster cleaning
Dirt no longer bonds with the surface and can be removed very quickly and easily. All you need is water and a microfiber cloth.
Save 90 % cleaning agent
You only need water.
Surfaces coated with Nanotol can be cleaned without cleaning agents. Dirt is simply removed with a damp cloth and the glass and frame are finally dried with a microfiber cloth.
The effect lasts for many years
One-time basic nano coating.
After the one-time basic coating, the effect lasts for 2-3 years. Refreshing and prolonging the Nanotol effect is quick and easy with Nanotol 1+2.
Renew nano coating after 2-3 years
After the basic coating, use Nanotol 1+2, if necessary!
Basic coating for 40 m²
1 litre for 160 m²
Basic coating set for 80 m²
Basic coating set for 160 m²
500 ml for 80 m²
250 ml for 40 m²
It's so easy to nano coat your windows and window frames with Nanotol
Nanotol Household is a professional nano coating for all surfaces around the window.
Procedure of Nanotol basic coating on windows:
- Thorough pre-cleaning with Nanotol Household Cleaner (video on the left).
- Application of Nanotol Household Protector
- Activation of the nanopolymers using Nanotol microfiber cloth
All necessary components are included in the Nanotol Household Set
Basic nano coating
The one-time basic coating forms the basis for the long-lasting protective layer. The set contains everything needed for basic coating:
- Nano coating
- Polishing cloths
Die einmalige Grundversiegelung bildet die Basis für die jahrelange Schutzschicht.. Das Set enthält alles, was für die Grundversiegelung benötigt wird
Alle 6-9 Monate empfehlen wir eine Auffrischung. Nanotol 2in1 reinigt und versiegelt in einem Schritt und füllt Fehlstellen wieder auf. Bereits versiegelte Oberflächen bleiben länger aktiv und Schmutz abweisend - solange Sie möchten.
Nanotol 2in1 wird einfach auf das nasse Auto aufgesprüht, mit einem Tuch verteilt und dann mit dem gelösten Schmutz wieder abgespült. Das ist alles!
We recommend a refresher treatment with Nanotol 1+2 every 3-5 years. This fills in gaps and the effect is renewed.
Nanotol 2in1 is simply sprayed onto the wet surface, distributed with a cloth and then washed off again with the dissolved dirt. That's all!
More areas of applications for Nanotol Household
Class cabinets, glass tables and furniture look more valuable when they are clean. Nano coating with Nanotol Household makes surfaces antistatic and thus repels dust. You will notice less dusting, smudges and fingerprints can quickly be removed with a dry cloth.
- Antistatic and dust repellent
- Crystal glass effect and high quality appearance
- All surfaces are sustainably protected
- Fast cleaning without detergents
Clean and coat PV systems
Contamination of solar modules causes a loss of performance of up to 50%. Modules coated with a Nanotol stay clean for longer and can be easily and gently cleaned of all dirt. A rain shower is often enough. The nano coating lasts for many years and can also be renewed very easily during cleaning. Learn more
Investing in the nano coating quickly pays off:
Nano coat the worktop with Nanotol
The worktop in the kitchen is probably the most cleaned surface in the household. Everyone wants hygienically clean conditions when preparing food. Work surfaces coated with Nanotol are so dirt-repellent that they can be proven to be hygienically clean simply by wiping with water.
- Nanotol is permanently temperature-resistant up to 200 °C and is therefore also suitable for the hob or ceramic hob
- Refresh once a week with Nanotol Household 2in1
- Quick cleaning just with water
Sealing the kitchen sink
High-quality kitchen sinks made of Granit (Fragranite, Silgranite, Tegranite), ceramics or stainless steel can be protected against lime deposits and discoloration for many years with Nanotol Sanitär 1+2. The surface becomes dirt-repellent and is therefore easier to clean. It goes without saying that Nanotol is food safe. There is nothing to prevent direct contact with food lying on a sealed surface.
- cleans pore-deep and gently
- cleans hygienically clean
- impregnates against dirt and lime
- is easy and quick to use
K3 Bodenreiniger mit Versiegelungseffekt
Versiegeln Sie Ihren Boden einfach bei der normalen Reinigung. Nanotol K3 Bodenreiniger baut additiv eine unsichtbare Schutzschicht auf, die die Reinigung erheblich erleichtert.
Nanotol K3 Bodenreiniger mit Versiegelungseffekt
- reinigt hygienisch sauber
- baut die Versiegelung additiv auf
- wird einfach beim Wischen angewendet
- wirkt gegen Verschleiß und schont die Oberfläche
General questions about Nanotol
Here are questions that do not concern a specific application with Nanotol:
How long the does the nano coating last on windows?
The basic coating with Nanotol lasts for several years. Depending on the load on the surface (position of the windows), this is between 3 and 8 years.
Afterwards, you can easily and quickly refresh the coating with Nanotol Household 1+2, instead of cleaning with water. Just spray, spread and wash off - done. This refreshment will then last 1-2 years.
Why does Nanotol keep the windows clean longer?
- The surface is noticeably smoothed by Nanotol and therefore repels dirt. Less dirt settles on the surface.
- The glass surface is polarised by Nanotol and thus dust-repellent.
Is it possible to use a different pre-cleaner?
Nanotol Protecor can only attach evenly if there are no residues on the surface that could cause chemical interference. These can be caused, for example, by anionic surfactants contained in other cleaning agents or solvents in glass cleaners.
Nanotol Cleaner is perfectly matched to Nanotol Protector and contains very high-quality non-ionic surfactants. The cleaning result is better than with conventional standard cleaning agents. For best results, we recommend to use the Nanotol Cleaner of the appropriate category. Note: Nanotol Cleaners are all different!
How often do you have to clean the windows after the Nanotol nano coating?
It depends a bit on the location, i.e. whether the window is on a busy street or on the side facing towards or away from the weather. You can approximately halve the frequency required before coating. Additionally, cleaning is much faster, so you need considerably less time for it after the nano coating.
Do you have to clean the windows with Nanotol Cleaner after Nanotol nano coating?
After coating with Nanotol, windows are simply cleaned with water. Plenty of water, i.e. a wet cloth makes cleaning easier because dirt is better absorbed by water due to the water repellent effect.
If this is not enough, e.g. because there is bird poop on the window, loosen the dirt with Cleaner Step 1. Then you can simply wipe it away. The Cleaner does not harm the coating.
What should you do after the windows have been coated with Nanotol nano coating?
After coating with Nanotol, you should no longer use "normal" glass cleaners, because they usually contain alcohol and/or anionic tensides which harm the Nanotol coating. You also no longer need any of these conventional cleaning agents, as water is sufficient for cleaning
Is it true that I can clean the windows in the sun after coating with Nanotol?
Yes, you can clean windows in the blazing sun and you can also do the coating with Nanotol in the sunshine. Heat even improves the result.
Can you still use a window vacuum cleaner or squeegee to clean windows after Nanotol nano coating?
You can use both a squeegee and a window vacuum cleaner after coating with Nanotol. Simply wipe off with water, then vacuum or pull off water with the dissolved dirt. If necessary, dry residual water on the edges with a microfibre cloth.
What is the difference between normal window cleaner sprays and nano coating with Nanotol?
The difference lies in the static charge of the outer surface.
The surface is negatively charged by "normal" window cleaners containing alcohol or by conventional cleaning agents. This results in a dirt and dust attracting effect.
Nanotol, however, does not charge the surface but creates an antistatic layer. This repels dust and the windows stay clean longer and are easier to clean.
Can the window frames also be coated with Nanotol nano coating?
You can coat window frames made of plastic, painted wood and aluminium with Nanotol. This makes annual cleaning much easier and, above all, the surfaces remain smooth because you do not have to "scrub". New windows therefore remain as good as new for many years and even older window frames age more slowly after a Nanotol coating.
Should coarse dirt be removed with another cleaning agent before using the Nanotol Household Set
Quite clearly, no. You can and should start right away with Nanotol Cleaner Step 1, because the Cleaner dissolves the dirt so that you can wipe it off more easily and not damage the window frames.
Wipe the window and frame with water first, spray on Nanotol Cleaner 1 (with the ready-to-use bottle), spread it and let it soak for a little while (about 30 seconds) so that the chemistry can work. Now you can remove the dirt easily.
Where is the difference between the products in the catagories Car, Household and Sanitary?
In order for Nanotol Protector to attach evenly, the surface must be very clean before coating. The pre-treatment/cleaning is therefore very important and differs. In the sanitary area, there are usually limescale residues on the surface, for instance in shower cubicles. It is imperative that these are removed. That is why our Nanotol Cleaner for the sanitary area is acidic. Dirt on cars is often very stubborn. Here, too, the Nanotol Cleaner is effective. In the household area, there are very sensitive surfaces that need to be cleaned carefully. The Cleaner from the household category is therefore very gentle.
Each category has its own Cleaner, which is ideal for preparing the surface for subsequent coating. All cleaners contain no anionic surfactants, no alcohols or solvents and are easily biodegradable.
Consequently, the 2in1 products in the categories also differ because they clean and freshen up.
Stone surfaces can be prepared for Nanotol Protector Mineral Surfaces with a high-pressure cleaner. Textiles are washed and rinsed well before coating with Nanotol Textile Protector. There is no special cleaner for these two areas. However, both can be cleaned with Nanotol Household Cleaner in case of stubborn stains.
Can the Nanotol Household products also be used to coat the shower?
Partlyl: Cleaner – no. Protector – yes. 1+2 – no.
In the sanitary area, there are usually limescale residues caused by water which has dried on the surface, for example, in a shower cubicle. It is imperative that such residues are removed. That is why our Sanitary Cleaner is acid to desolve lime chemically. In the household area, however, there are very sensitive surfaces that need to be cleaned carefully.The Cleaner from the household category is therefore alkaline, very gentle and not suitable for precleaning in the shower. The Household Protector, on the other hand, can be used on shower glass as well as on window glass. The Nanotol 1+2 products contain Cleaner and therefore also differ in the categories.