Nano coating for rims
Nanotol nano coating forms an invisible protective layer on all rims
Stays clean longer - easy to clean
The easy-to-clean-effect with a long-term protective effect for value retention, allows cleaning with water only, without harsh cleaning agents.
Nano coating for rims
Nanotol nano coating forms an invisible protective layer on all rims
Stays clean longer - easy to clean
The easy-to-clean-effect with a long-term protective effect for value retention, allows cleaning with water only, without harsh cleaning agents.
Apply nano coating on rims yourself
Nanotol is the first universally applicable nano coating that prepares surfaces of rims so that they can be cleaned in an environmentally friendly and simple way. Since 2005, Nanotol has excited thousands of customers who use the "do-it-yourself method" to protect their car rims, caravan rims or motorcycle rims from dirt and aging. You don't need an expert for this and can save a lot of money. The Nanotol system convinces with its long durability and easy application. You don't even need to go to an expensive garage for a new nano treatment
Do it yourself - be independent!




Cleaning, preparation and care
Suitable for
- Steel and aluminium rims
- New and used rims
- Car paint and car glass
- Gloss paint, matt paint, metallic paint
One product for many surfaces on the car. You no longer need different nano coatings!
Easy to use
- Save cleaning time NOW
- One-time basic coating
- Inexpensive care products to renew the coating once per season
The basic coating with the Nanotol Car, Boat & Leisure Set is done quickly after cleaning. You do not need any protective equipment, applicators or machines, just a microfibre cloth.
VISUAL ENHANCEMENT
Beauty treatment
Nanotol fills the pores of the surface and smoothes it. Rims still shine even after years. Yellow, damaged surfaces look much better than before.
Easy to clean
Less maintenance
Nanotol coating is quick and easy, the effect lasts for many months.
Long-term value preservation
Through invisible protective layer
Coated rims are better protected against environmental influences and no longer need aggressive cleaners.
Easy-to-clean coating
Gentle and fast cleaning
Dirt can no longer adhere firmly to the smoothed surface and cleaning is significantly easier.
Renew nano coating for rims once per season
After the basic coating use Nanotol 1+2 if required
Basic coating for 10-20 m²
-
250 ml for 40 m²
Nanotol nano coating for rims is so easy to apply
Nanotol Car, Boat & Leisure Set is a professional nano coating for rims that can also be used by non-professionals without any problems. The protective effect and durability is unlimited thanks to our care products.
Procedure of Nanotol basic coating for rims:
-
Thorough pre-cleaning with Nanotol Cleaner (observe soaking time and repeat if necessary)
-
Application of nano coating Nanotol Protector
-
Activation of nanopolymers with the Nanotol microfibre cloth
All necessary components are included in the Nanotol Car, Boat & Leisure Set .
BASIC COATING
The one-time basic coating forms the basis for the long-lasting protective layer. The set contains everything needed for basic coating
- Cleaner
- Nano coating
- Polishing cloths
RENEWING
We recommend to renew the nano coating every 6-9 months. Nanotol 2in1 cleans and coats in one step and fills up imperfections. Surfaces already coated with Nanotol remain active and dirt-repellent much longer - as long as you want.
Nanotol 2in1 is simply sprayed onto the wet surface, spread with a cloth and then rinsed off again with the dissolved dirt. That's all!
GRUNDVERSIEGELUNG
Die einmalige Grundversiegelung bildet die Basis für die jahrelange Schutzschicht.. Das Set enthält alles, was für die Grundversiegelung benötigt wird
- Vorreiniger
- Nanoversiegelung
- Poliertücher
AUFFRISCHUNG
Alle 6-9 Monate empfehlen wir eine Auffrischung. Nanotol 2in1 reinigt und versiegelt in einem Schritt und füllt Fehlstellen wieder auf. Bereits versiegelte Oberflächen bleiben länger aktiv und Schmutz abweisend - solange Sie möchten.
Nanotol 2in1 wird einfach auf das nasse Auto aufgesprüht, mit einem Tuch verteilt und dann mit dem gelösten Schmutz wieder abgespült. Das ist alles!
-
-
Advantages of a Nanol coating for rims
Save time thanks to nano coating for rims
Every time you change your tyres this year, you plan to clean the rims thoroughly, but then you don't do it because of stubborn dirt. With Nanotol nano coating for rims, you can reduce the time-consuming care of rims to a minimum. A one-time basic coating provides dirt-repellent properties for many years. Even stubborn brake dust can be removed with water.
- Nano coatings protect against stubborn dirt
- Cleaning is fast and easy afterwards
- All surfaces are sustainably protected
- No need to use aggressive cleaning agents

Coating for rims as a visual upgrade
Rims coated with Nanotol have a smoother surface, thus, not only dirt can very easily be removed.
The entire surface obtains an upgrade and shines beautifully as new. Agressive special cleaners that damage sensitive rims are not necessary anymore. The effect can be maintained permanently with the appropriate Nanotol care products.
The investment in nano coating pays off quickly:
- Rims like new even after many years
- Expensive, special cleaners are no longer required
- Rims care happens along the way, every year, without great effort or external costs.

Heat resistant coating for rims
Rims often reach high temperatures, which causes brake dust to burn in. This is also the reason why dirt on the rims is particularly difficult to remove. A coating for rims must therefore withstand these high temperatures.
- Nanotol is resistant to continuous temperatures of up to 200 °C
- Brake dust no longer burns in
- Rims look as good as new


Nano coating even for rims of motorcycles
Of course, Nanotol nano coating can also be used to protect surfaces other than car rims. The advantages are obvious
- The visual appearance is remarkable
- Cleaning is possible with water without a great deal of time
- The resale value of the motorcycle remains high
General questions about Nanotol
Why can rims be cleaned so much easier with Nanotol?
- The surface is noticeably smoothed by Nanotol and therefore repels dirt. Less dirt settles on the surface.
- Since dirt does not stick firmly, it can be easily removed.
How long does the Nanotol nano coating last on rims?
The basic coating with Nanotol lasts approx. 9-12 months. Depending on the exposure on the surface (miles driven), the entire surface should be refreshed 1-2 times a year with Nanotol Car, Boat & Leisure 1+2.
Water is suffucient for cleaning from time to time. Use a high-pressure cleaner or garden hose in combination with a soft cloth to completely remove the dirt.
Is it possible to use a different pre-cleaner?
Nanotol Protecor can only attach evenly if there are no residues on the surface that could cause chemical interference. These can be caused, for example, by anionic surfactants contained in other cleaning agents or solvents in glass cleaners.
Nanotol Cleaner is perfectly matched to Nanotol Protector and contains very high-quality non-ionic surfactants. The cleaning result is better than with conventional standard cleaning agents. For best results, we recommend to use the Nanotol Cleaner of the appropriate category. Note: Nanotol Cleaners are all different!
How long does it take to apply the Nanotol coating to rims?
Coating with Nanotol is quickly done once the rims are clean. Spray with Nanotol Protector, spread it, then polish the dried surface with a microfibre cloth until it is smooth. This takes about 5 minutes for one rim.
Cleaning beforehand with Nanotol Cleaner can take a little bit longer, depending on the condition of the rims. An accurate cleaning procedure is a mandatory requirement for an even docking of the nanopolymers.