Nano coating for cars
Nanotol Car, Boat & Leisure forms an invisible protective layer
on paint, glass and rims.
The entire car gets a high-quality look and stays cleaner longer.
Nanotol nano coating is worthwhile for long-term value retention of new cars and for visual enhancement of used vehicles.
Nano coating for cars
Nanotol Car, Boat & Leisure forms an invisible protective layer
on paint, glass and rims.
The entire car gets a high-quality look and stays cleaner longer.
Nanotol nano coating is worthwhile for long-term value retention of new cars and for visual enhancement of used vehicles.
Apply nano coating yourself
Nanotol is the first universally applicable nano coating that prepares surfaces so that they can be cleaned in an environmentally friendly and simple way. Since 2005, Nanotol has excited thousands of customers who use the "do-it-yourself method" to protect their cars from dirt and aging. You don't need an expert for this and can save a lot of money. The Nanotol system convinces with its long durability and easy application. You don't even need to go to an expensive garage for a new nano treatment.
Do it yourself - be independent!
Cleaning, preparation and care
Suitable for
- New and used cars
- Car paint, car glass, rims
- Gloss paint, matt paint, metallic paint
- Steel and aluminium rims
One product for all surfaces. You no longer need different nano coatings!
Easy to use
- Save on expensive car preparation
- One-time basic coating
- Inexpensive care products to renew the nano coating
- Durability 6-12 months
The basic coating with the Nanotol Car, Boat & Leisure Set is done quickly after cleaning. You do not need any protective equipment, applicators or machines, just a microfibre cloth.
DEEP GLOSS
Better than new!
Nanotol fills the pores of the surface and smoothes them. New cars shine even better and used paintwork looks as good as new.
LOTUS EFFECT
Driving without windscreen wipers
Water rolls off. From approx. 80 kmh, windscreen wipers are no longer needed in heavy rain.
long-term value preservation
Through invisible protective layer
Nanotol reduces the negative influences of environmental pollution. The car looks as good as new even after many years.
Easy-to-clean coating
Gentle and quick cleaning
Dirt can no longer adhere firmly to the smoothed surface and cleaning is much easier.
Renew nano coating after 6-9 months
After the basic coating, use Nanotol 1+2 if required!
Basic coating
for 1 car (20m²)
Basic coating
for 2 cars or SUV (40m²)
Basic coating
for 8 cars, caravan, boat (160 m²)
-
-
-
1 litre
for 160 m²
3 litres
2 + 1 FOR FREE
Basic coating-set for 2 cars
+ 1 litre Nanotol 2in1 cleaner&protector
-
-
-
-
This is how easy it is to apply Nanotol nano coating to a car
Nanotol Car, Boat & Leisure is a professional nano coating for the car that can be easily applied at home even by non-professionals. The protective effect and durability is unlimited with care products.
Procedure of the Nanotol basic coating:
-
Thorough pre-cleaning with Nanotol Cleaner
-
Application of nano coating with Nanotol Protector
-
Activation of nanopolymers with Nanotol microfiber cloth
All required components are included in our Nanotol Car, Boat & Leisure Set .
BASIC COATING
The one-time basic coating forms the basis for the long-lasting protective layer. The set contains everything needed for basic coating
- Cleaner
- Nano coating
- Polishing cloths
RENEWING
We recommend to renew the nano coating every 6-9 months. Nanotol 2in1 cleans and coats in one step and fills up imperfections. Surfaces already coated with Nanotol remain active and dirt-repellent much longer - as long as you want.
Nanotol 2in1 is simply sprayed onto the wet surface, spread with a cloth and then rinsed off again with the dissolved dirt. That's all!
GRUNDVERSIEGELUNG
Die einmalige Grundversiegelung bildet die Basis für die jahrelange Schutzschicht.. Das Set enthält alles, was für die Grundversiegelung benötigt wird
- Vorreiniger
- Nanoversiegelung
- Poliertücher
AUFFRISCHUNG
Alle 6-9 Monate empfehlen wir eine Auffrischung. Nanotol 2in1 reinigt und versiegelt in einem Schritt und füllt Fehlstellen wieder auf. Bereits versiegelte Oberflächen bleiben länger aktiv und Schmutz abweisend - solange Sie möchten.
Nanotol 2in1 wird einfach auf das nasse Auto aufgesprüht, mit einem Tuch verteilt und dann mit dem gelösten Schmutz wieder abgespült. Das ist alles!
-
-
General advantages of a nano coating
From car wax to nano coating
In the past, only wax products were available to protect sensitive car paint. These had a short service life of a few weeks and also had to be laboriously polished. There was no protection at all for car glass and car rims.
Nano coatings are a simple and time-saving successor to car wax. Car care thus achieves a new quality.
- Nano coatings work much longer than car waxes
- All surfaces are sustainably protected - not just paintwork
- The application is easier and faster
Sustainable cleaning
In the past, dirt on cars could only be removed with aggressive special cleaners, which often damaged sensitive surface. As a result, car paint aged quickly and looked dull.
After the nano coating, dirt on car paint, rims or car glass can simply be removed with water. The investment in nano coating pays off quickly:
- Aggressive cleaning agents are no longer needed
- Cleaning is effective and time-saving
- In the long term, nano coating is more economical and ecological than conventional car care products.
Nano coating for rims
In the past, there were no protective products for sensitive rim surfaces. With nano coatings rims simply repel brake dust. They do not even have to be dismantled.
- After nano coating, brake dust can be removed with water
- Gentle cleaning - aggressive cleaning agents are no longer needed thanks to the nano protective layer - there are no scratches
- Expensive rims remain as good as new and beautiful for longer
Nano coating for headlights
Headlights made of glass or plastic can also be coated with Nanotol nano coating. The advantages are obvious.
- Headlights become more translucent with Nanotol, as the refractive index is improved by smoothing the surface
- The headlight cones provide sufficient light
- Plastic is protected from shading
- Dirt is washed off when it rains
General questions about Nanotol
Why does Nanotol keep the car clean longer?
- The surface is noticeably smoothed by Nanotol and therefore repels dirt. Less dirt settles on the surface.
- Since dirt does not stick firmly, it can be easily washed off by rain.
How long does the Nanotol nano coating last on the vehicle?
The basic coating with Nanotol lasts approx. 9-12 months. Depending on the exposure on the surface (miles driven), the entire surface should be refreshed 1-2 times a year with Nanotol Car, Boat & Leisure 1+2.
Water is suffcient for cleaning from time to time. Use a high-pressure cleaner or garden hose in combination with a soft cloth to completely remove the dirt.
.
Is it possible to use a different pre-cleaner?
Nanotol Protecor can only attach evenly if there are no residues on the surface that could cause chemical interference. These can be caused, for example, by anionic surfactants contained in other cleaning agents or solvents in glass cleaners.
Nanotol Cleaner is perfectly matched to Nanotol Protector and contains very high-quality non-ionic surfactants. The cleaning result is better than with conventional standard cleaning agents. For best results, we recommend to use the Nanotol Cleaner of the appropriate category. Note: Nanotol Cleaners are all different!
My car paint has small scratches. How do I pre-treat the paint?
The procedure for scratched vehicles is as follows:
- Wash the vehicle with the diluted cleaner. Ideally, use desalinated or distilled water.
- Polish the paint with Nanotol polishes. They are perfect prior to coating with Nanotol Protector.
- Spray with Nanotol Protector and spread with a sponge cloth. Allow to dry. Polish with the white microfiber cloths until the surface shines.
Is Nanotol also suitable for new paint?
Yes, Nanotol is perfect for new paint , because it contains neither solvents nor abrasive particles and preserves the paint condition. Car paint keeps looking new.
NOTE: Some of the manufacturers apply a layer of wax on new cars. It is imperative to remove it prior to coating with Nanotol. Use a wax remover from the DIY store or car accessory shop.
Do I need protective equipment for coating my car with Nanotol nano coating?
You don't need neither gloves nor a mask when working with Nanotol. Nanotol cannot enter the body through the skin or lungs because there are no individual free nanoparticles.
Nanotol works with a net structure of nanopolymers. It contains no fragrance or dyes, no alcohol or chlorine. Nanotol is food safe and biodegradable. Learn more
My car has been waxed, can I apply Nanotol anyway?
No, you have to remove the wax first otherwise Nanotol cannot bond with the metal surface.
Where is the difference between the products in the catagories Car, Household and Sanitary?
In order for Nanotol Protector to attach evenly, the surface must be very clean before coating. The pre-treatment/cleaning is therefore very important and differs. In the sanitary area, there are usually limescale residues on the surface, for instance in shower cubicles. It is imperative that these are removed. That is why our Nanotol Cleaner for the sanitary area is acidic. Dirt on cars is often very stubborn. Here, too, the Nanotol Cleaner is effective. In the household area, there are very sensitive surfaces that need to be cleaned carefully. The Cleaner from the household category is therefore very gentle.
Each category has its own Cleaner, which is ideal for preparing the surface for subsequent coating. All cleaners contain no anionic surfactants, no alcohols or solvents and are easily biodegradable.
Consequently, the 2in1 products in the categories also differ because they clean and freshen up.
Stone surfaces can be prepared for Nanotol Protector Mineral Surfaces with a high-pressure cleaner. Textiles are washed and rinsed well before coating with Nanotol Textile Protector. There is no special cleaner for these two areas. However, both can be cleaned with Nanotol Household Cleaner in case of stubborn stains.
Do I still have to preclean with Nanotol Cleaner even on a new car?
Yes, please use Nanotol Cleaner before you start coating with Nanotol Protector. Nanotol Cleaner is optimally preparing the surface for the coating. New cars often have a wax protection. It is imperative to remove the wax prior to coating the surface.
Why is a professional nano coating in garages much more expensive than Nanotol?
That's a good question! You can see the price for the necessary chemicals on this page. For a car, the costs are no more than 30-40 € including all the necessary tools.
Often you have to pay many hundreds of Euros for a "professional ceramic coating" at a garage.The difference is in the working time which is expensive. Beforehand, the paint is usually polished in several processes. The price for this is included in the nano coating package.
Polishing before coating with Nanotol is only necessary if there are deep scratches. Light scratches or holograms caused by car wash facilities, are almost not visible anymore after a Nanotol coating, even without polishing.
How do I remove Nanotol nano coating
If you remove the Nanotol coating from the vehicle, because you want to apply a film, for instance, lather the area with a cleaning agent that contains anionic surfactants. This can be a dishwashing detergent, for example. Let the foam soak for a while, it will harm the nanopolymer structure. Rinse off the soap, degrease and apply the film.
Finally, the Nanotol layer can also be partially renewed over the film.
How long does it take to apply the Nanotol coating to a car?
Coating with Nanotol is quickly done once the car is clean. Spray with Nanotol Protector, spread it with a sponge cloth, then polish the dried surface with a microfibre cloth until it is smooth. This takes about 15-30 minutes.
Cleaning beforehand with Nanotol Cleaner can take a little bit longer, depending on the condition of the vehicle. An accurate cleaning procedure is a mandatory requirement for an even docking of the nanopolymers.